ČSN - Tschechische nationale Normen

Seite 1522

87159 gefundene Produkte
Ordnen nach:
  • Relevanz
    • Relevanz
    • Datum (das neueste)
    • Datum (das älteste)
ČSN 241477 (14.4.1975)

ČSN 241477 (14.04.1975)

Reduction sleeves with Morse taper shanks and hollows

Verfügbare Sprachen: Tschechisch

Verfügbare Ausführung: Gedruckt

ab 62.00 CZK weitere informationen
ČSN 241478 (14.4.1975)

ČSN 241478 (14.04.1975)

Couplings for reduction sleeves with Morse taper shanks and hollows

Verfügbare Sprachen: Tschechisch

Verfügbare Ausführung: Gedruckt

ab 29.00 CZK weitere informationen
ČSN 241480 (24.6.1971)

ČSN 241480 (24.06.1971)

Reduction sleeves with steep taper shanks and hollows

Verfügbare Sprachen: Tschechisch

Verfügbare Ausführung: Gedruckt

ab 120.00 CZK weitere informationen
ČSN 241481 (24.6.1971)

ČSN 241481 (24.06.1971)

Reduction sleeves with steep taper shanks and taper Morse hollows

Verfügbare Sprachen: Tschechisch

Verfügbare Ausführung: Gedruckt

ab 120.00 CZK weitere informationen
ČSN ISO 3936 (1.3.2005)

ČSN ISO 3936 (01.03.2005)

Reduction sleeves with tenon drive with external and internal 7/24 taper - Dimensions

Verfügbare Sprachen: Tschechisch

Verfügbare Ausführung: Gedruckt

ab 120.00 CZK weitere informationen
ČSN ISO 3936 (1.2.1993)

ČSN ISO 3936 (01.02.1993) Ungültige

Reduction sleeves with tenon drive external and internal 7/24 taper - Dimensions

Verfügbare Ausführung: Gedruckt

ab 62.00 CZK weitere informationen
ČSN 241483 (24.6.1971)

ČSN 241483 (24.06.1971)

Couplings for reduction sleeves with steep taper shanks and steep or Morse hollows

Verfügbare Sprachen: Tschechisch

Verfügbare Ausführung: Gedruckt

ab 62.00 CZK weitere informationen
ČSN ISO 5414-1 (1.2.2005)

ČSN ISO 5414-1 (01.02.2005)

Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools - Part 1: Dimensions of the driving system of tool shanks

Verfügbare Sprachen: Tschechisch

Verfügbare Ausführung: Gedruckt

ab 186.00 CZK weitere informationen
ČSN ISO 5414-2 (1.2.2005)

ČSN ISO 5414-2 (01.02.2005)

Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools - Part 2: Connecting dimensions of chucks and designation

Verfügbare Sprachen: Tschechisch

Verfügbare Ausführung: Gedruckt

ab 186.00 CZK weitere informationen
ČSN ISO 5414-2 (1.2.1993)

ČSN ISO 5414-2 (01.02.1993) Ungültige

Tool chucks (end mill holders) with clamp screws for flatted parallel shank tools - Part 2: Connecting dimensions of chucks

Verfügbare Ausführung: Gedruckt

ab 120.00 CZK weitere informationen
Loading
Cookies Cookies

Potřebujeme Váš souhlas k využití jednotlivých dat, aby se Vám mimo jiné mohli ukazovat informace týkající se Vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.

Souhlas můžete odmítnout zde.

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme Váš souhlas k využití jednotlivých dat, aby se Vám mimo jiné mohli ukazovat informace týkající se Vašich zájmů.