ČSN - Tschechische nationale Normen

Seite 393

86316 gefundene Produkte
Ordnen nach:
  • Relevanz
    • Relevanz
    • Datum (das neueste)
    • Datum (das älteste)
ČSN EN ISO 10683 (1.11.2015)

ČSN EN ISO 10683 (01.11.2015) Ungültige

Fasteners - Non-electrolytically applied zinc flake coatings

Verfügbare Ausführung: Gedruckt

ab 14.40 EUR weitere informationen
ČSN EN ISO 10683 (1.9.2001)

ČSN EN ISO 10683 (01.09.2001) Ungültige

Fasteners - Non-electrolytically applied zinc flake coatings

Verfügbare Ausführung: Gedruckt

ab 9.20 EUR weitere informationen
ČSN EN ISO 4759-1 (1.11.2001)

ČSN EN ISO 4759-1 (01.11.2001)

Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts - Product grades A, B and C

Verfügbare Sprachen: Tschechisch

Verfügbare Ausführung: Gedruckt

ab 24.40 EUR weitere informationen
ČSN EN ISO 4759-3 (1.1.2017)

ČSN EN ISO 4759-3 (01.01.2017)

Tolerances for fasteners - Part 3: Washers for bolts, screws and nuts - Product grades A, C and F

Verfügbare Sprachen: Englisch

Verfügbare Ausführung: Gedruckt

ab 13.90 EUR weitere informationen
ČSN EN ISO 4759-3 (1.8.2001)

ČSN EN ISO 4759-3 (01.08.2001) Ungültige

Tolerance for fasteners - Part 3: Plain washers for bolts, screws and nuts - Product grades A and C

Verfügbare Ausführung: Gedruckt

ab 7.70 EUR weitere informationen
ČSN EN ISO 16426 (1.7.2003)

ČSN EN ISO 16426 (01.07.2003)

Fasteners - Quality assurance system

Verfügbare Sprachen: Tschechisch

Verfügbare Ausführung: Gedruckt

ab 13.90 EUR weitere informationen
ČSN EN 26157-1 (1.3.1995)

ČSN EN 26157-1 (01.03.1995)

Fasteners. Surface discontinuities. Part 1: Bolts, screws and studs for general requirements

Verfügbare Sprachen: Tschechisch

Verfügbare Ausführung: Gedruckt

ab 7.70 EUR weitere informationen
ČSN EN ISO 6157-2 (1.2.2005)

ČSN EN ISO 6157-2 (01.02.2005)

Fasteners - Surface discontinuities - Part 2: Nuts

Verfügbare Sprachen: Tschechisch

Verfügbare Ausführung: Gedruckt

ab 9.20 EUR weitere informationen
ČSN EN 26157-3 (1.3.1995)

ČSN EN 26157-3 (01.03.1995)

Fasteners. Surface discontinues. Part 3: Bolts, screws and studs for special requirements

Verfügbare Sprachen: Tschechisch

Verfügbare Ausführung: Gedruckt

ab 9.20 EUR weitere informationen
ČSN EN 26157-3:1995/Oprava1 (1.8.2024)

ČSN EN 26157-3:1995/Oprava1 (01.08.2024) Correction

Spojovací součásti. Povrchové vady. Část 3: Šrouby pro zvláštní použití.

Verfügbare Sprachen: Tschechisch

Verfügbare Ausführung: Gedruckt

ab 1.20 EUR weitere informationen
Loading
Cookies Cookies

Potřebujeme Váš souhlas k využití jednotlivých dat, aby se Vám mimo jiné mohli ukazovat informace týkající se Vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.

Souhlas můžete odmítnout zde.

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme Váš souhlas k využití jednotlivých dat, aby se Vám mimo jiné mohli ukazovat informace týkající se Vašich zájmů.