ČSN - Tschechische nationale Normen

Seite 4624

87051 gefundene Produkte
Ordnen nach:
  • Relevanz
    • Relevanz
    • Datum (das neueste)
    • Datum (das älteste)
ČSN EN 10263-5 (1.3.2002)

ČSN EN 10263-5 (01.03.2002) Ungültige

Ocelové dráty válcované, tyče a dráty tažené pro pěchování a protlačování za studena - Část 5: Technické dodací podmínky pro korozivzdorné oceli (Norma k přímému použití jako ČSN).

Verfügbare Ausführung: Gedruckt

ČSN EN 10263-5 (1.6.2005)

ČSN EN 10263-5 (01.06.2005) Ungültige

Steel rod, bars and steel wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels

Verfügbare Ausführung: Gedruckt

ab 9.20 EUR weitere informationen
ČSN EN 10137-1 (1.8.1998)

ČSN EN 10137-1 (01.08.1998) Ungültige

Plates and wide flats made of hogh yield strength structural steels in the quenched and tempered or precipitation hardened conditions - Part 1: General delivery conditions

Verfügbare Ausführung: Gedruckt

ab 9.20 EUR weitere informationen
ČSN EN 10137-2 (1.11.1998)

ČSN EN 10137-2 (01.11.1998) Ungültige

Plates and wide flats made of highyield strength structural steels in the quenched and tempered or precipitation hardened conditions - Part 2: Delivery conditions for quenched and tempered steels

Verfügbare Ausführung: Gedruckt

ab 9.20 EUR weitere informationen
ČSN EN 10137-3 (1.12.1998)

ČSN EN 10137-3 (01.12.1998) Ungültige

Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions - Part 3: Delivery conditions for precipitation hardened steels

Verfügbare Ausführung: Gedruckt

ab 7.60 EUR weitere informationen
ČSN EN 10149-1 (1.12.2013)

ČSN EN 10149-1 (01.12.2013)

Hot rolled flat products made of high yield strength steels for cold forming - Part 1: General technical delivery conditions

Verfügbare Sprachen: Tschechisch

Verfügbare Ausführung: Gedruckt

ab 9.20 EUR weitere informationen
ČSN EN 10149-2 (1.12.2013)

ČSN EN 10149-2 (01.12.2013)

Hot rolled flat products made of high yield strength steels for cold forming - Part 2: Technical delivery conditions for thermomechanically rolled

Verfügbare Sprachen: Tschechisch

Verfügbare Ausführung: Gedruckt

ab 9.20 EUR weitere informationen
Loading
Cookies Cookies

Potřebujeme Váš souhlas k využití jednotlivých dat, aby se Vám mimo jiné mohli ukazovat informace týkající se Vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.

Souhlas můžete odmítnout zde.

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme Váš souhlas k využití jednotlivých dat, aby se Vám mimo jiné mohli ukazovat informace týkající se Vašich zájmů.