DIN - Deutsche nationale Normen

Seite 267

197782 gefundene Produkte
Ordnen nach:
  • Relevanz
    • Relevanz
    • Datum (das neueste)
    • Datum (das älteste)
DIN EN 12007-3:2015-07 (1.7.2015)

DIN EN 12007-3:2015-07 (01.07.2015)

Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific funtional requirements for steel.
(Gasinfrastruktur - Rohrleitungen mit einem maximal zulässigen Betriebsdruck bis einschließlich 16 bar - Teil 3: Besondere funktionale Anforderungen für Stahl.)

Verfügbare Sprachen: Deutsch, Englisch

Verfügbare Ausführung: PDF - sofortiges Download, Gedruckt

ab 91.00 EUR weitere informationen
DIN EN 12007-4:2012-10 (1.10.2012)

DIN EN 12007-4:2012-10 (01.10.2012)

Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 4: Specific functional requirements for renovation.
(Gasinfrastruktur - Rohrleitungen mit einem maximal zulässigen Betriebsdruck bis einschließlich 16 bar - Teil 4: Spezifische funktionale Anforderungen für die Sanierung.)

Verfügbare Sprachen: Deutsch, Englisch

Verfügbare Ausführung: PDF - sofortiges Download, Gedruckt

ab 105.40 EUR weitere informationen
DIN EN 12007-5:2025-06 (1.6.2025)

DIN EN 12007-5:2025-06 (01.06.2025)

Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 5: Service lines - Specific functional requirements.
(Gasinfrastruktur - Rohrleitungen mit einem maximal zulässigen Betriebsdruck bis einschließlich 16 bar - Teil 5: Netzanschlussleitungen - Spezifische funktionale Anforderungen.)

Verfügbare Sprachen: Deutsch, Englisch

Verfügbare Ausführung: PDF - sofortiges Download, Gedruckt

ab 105.40 EUR weitere informationen
DIN CEN/TS 12007-6:2021-06 (1.6.2021)

DIN CEN/TS 12007-6:2021-06 (01.06.2021)

Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 6: Specific functional recommendations for unplasticized polyamide (PA-U).
(Gasinfrastruktur - Rohrleitungen mit einem maximal zulässigen Betriebsdruck bis einschließlich 16 bar - Teil 6: Spezifische funktionale Anforderungen für weichmacherfreies Polyamid.)

Verfügbare Sprachen: Deutsch

Verfügbare Ausführung: PDF - sofortiges Download, Gedruckt

ab 84.50 EUR weitere informationen
DIN V 1201:2004-08 (1.8.2004)

DIN V 1201:2004-08 (01.08.2004)

Concrete pipes and fittings, unreinforced, steel fibre and reinforced for drains and sewers - Type 1 and Type 2 - Requirements, test methods and evaluation of conformity.
(Rohre und Formstücke aus Beton, Stahlfaserbeton und Stahlbeton für Abwasserleitungen und -kanäle - Typ 1 und Typ 2 - Anforderungen, Prüfung und Bewertung der Konformität.)

Verfügbare Sprachen: Deutsch

Verfügbare Ausführung: PDF - sofortiges Download, Gedruckt

ab 111.40 EUR weitere informationen
DIN EN 1201:2005-06 (1.6.2005)

DIN EN 1201:2005-06 (01.06.2005)

Chemicals used for treatment of water intended for human consumption - Potassium dihydrogen orthophosphate.
(Produkte zur Aufbereitung von Wasser für den menschlichen Gebrauch - Monokaliumdihydrogenphosphat.)

Verfügbare Sprachen: Deutsch, Englisch

Verfügbare Ausführung: PDF - sofortiges Download, Gedruckt

ab 77.20 EUR weitere informationen
DIN EN ISO 12010:2019-09 (1.9.2019)

DIN EN ISO 12010:2019-09 (01.09.2019)

Water quality - Determination of short-chain polychlorinated alkanes (SCCP) in water - Method using gas chromatography-mass spectrometry (GC-MS) and negative-ion chemical ionization (NCI).
(Wasserbeschaffenheit - Bestimmung von kurzkettigen Chloralkanen (SCCP) in Wasser - Verfahren mittels Gaschromatographie-Massenspektrometrie (GC-MS) und negativer chemischer Ionisation (NCI).)

Verfügbare Sprachen: Deutsch, Englisch

Verfügbare Ausführung: PDF - sofortiges Download, Gedruckt

ab 134.00 EUR weitere informationen
DIN EN 12012-1:2018-11 (1.11.2018)

DIN EN 12012-1:2018-11 (01.11.2018)

Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for blade granulators and shredders.
(Kunststoff- und Gummimaschinen - Zerkleinerungsmaschinen - Teil 1: Sicherheitsanforderungen für Schneidmühlen und Schredder.)

Verfügbare Sprachen: Deutsch, Englisch

Verfügbare Ausführung: PDF - sofortiges Download, Gedruckt

ab 98.30 EUR weitere informationen
DIN EN 12012-4:2021-12 (1.12.2021)

DIN EN 12012-4:2021-12 (01.12.2021)

Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators.
(Kunststoff- und Gummimaschinen - Zerkleinerungsmaschinen - Teil 4: Sicherheitsanforderungen für Agglomeratoren.)

Verfügbare Sprachen: Deutsch, Englisch

Verfügbare Ausführung: PDF - sofortiges Download, Gedruckt

ab 91.00 EUR weitere informationen
DIN EN 12013:2018-03 (1.3.2018)

DIN EN 12013:2018-03 (01.03.2018)

Plastics and rubber machines - Internal mixers - Safety requirements.
(Kunststoff- und Gummimaschinen - Innenmischer - Sicherheitsanforderungen.)

Verfügbare Sprachen: Deutsch, Englisch

Verfügbare Ausführung: PDF - sofortiges Download, Gedruckt

ab 157.10 EUR weitere informationen
Loading
Cookies Cookies

Potřebujeme Váš souhlas k využití jednotlivých dat, aby se Vám mimo jiné mohli ukazovat informace týkající se Vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.

Souhlas můžete odmítnout zde.

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme Váš souhlas k využití jednotlivých dat, aby se Vám mimo jiné mohli ukazovat informace týkající se Vašich zájmů.