DIN - Deutsche nationale Normen

Seite 2793

199119 gefundene Produkte
Ordnen nach:
  • Relevanz
    • Relevanz
    • Datum (das neueste)
    • Datum (das älteste)
DIN 53438-3:1984-06 (1.6.1984)

DIN 53438-3:1984-06 (01.06.1984)

Testing of combustible materials; response to ignition by a small flame; surface ignition.
(Prüfung von brennbaren Werkstoffen; Verhalten beim Beflammen mit einem Brenner; Flächenbeflammung.)

Verfügbare Sprachen: Deutsch, Englisch

Verfügbare Ausführung: PDF - sofortiges Download, Gedruckt

ab 34.30 EUR weitere informationen
DIN 53442:1990-09 (1.9.1990)

DIN 53442:1990-09 (01.09.1990)

Flexural fatique testing of plastics using flat specimens.
(Prüfung von Kunststoffen; Dauerschwingversuch im Biegebereich an flachen Probekörpern.)

Verfügbare Sprachen: Deutsch, Englisch

Verfügbare Ausführung: PDF - sofortiges Download, Gedruckt

ab 34.30 EUR weitere informationen
E DIN 5346:2026-08 (1.8.2026)

E DIN 5346:2026-08 (01.08.2026)

Surgical instruments - Emergency trays for acute surgical care of the severely injured.
(Chirurgische Instrumente - Notfallsiebe für die chirurgische Akutversorgung Schwerverletzter.)

Verfügbare Sprachen: Deutsch

Verfügbare Ausführung: PDF - sofortiges Download, Gedruckt

ab 56.20 EUR weitere informationen
DIN 53474:2023-10 (1.10.2023)

DIN 53474:2023-10 (01.10.2023)

Testing of plastics, rubber and elastomers - Determination of the chlorine content (Wickbold-Combustion).
(Prüfung von Kunststoffen, Kautschuk und Elastomeren - Bestimmung des Chlorgehaltes (Aufschluss nach Wickbold).)

Verfügbare Sprachen: Deutsch

Verfügbare Ausführung: PDF - sofortiges Download, Gedruckt

ab 56.20 EUR weitere informationen
DIN 53477:2018-09 (1.9.2018)

DIN 53477:2018-09 (01.09.2018)

Testing of plastics - Determination of particle size distribution of moulding materials by dry sieving analysis.
(Prüfung von Kunststoffen - Bestimmung der Korngrößenverteilung von Formmassen durch Trocken-Siebanalyse.)

Verfügbare Sprachen: Deutsch

Verfügbare Ausführung: PDF - sofortiges Download, Gedruckt

ab 48.80 EUR weitere informationen
DIN ISO 5348:2022-05 (1.5.2022)

DIN ISO 5348:2022-05 (01.05.2022)

Mechanical vibration and shock - Mechanical mounting of accelerometers.
(Mechanische Schwingungen und Stöße - Mechanische Ankopplung von Beschleunigungsaufnehmern.)

Verfügbare Sprachen: Deutsch, Englisch

Verfügbare Ausführung: PDF - sofortiges Download, Gedruckt

ab 98.30 EUR weitere informationen
DIN EN ISO 5349-1:2001-12 (1.12.2001)

DIN EN ISO 5349-1:2001-12 (01.12.2001)

Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 1: General requirements.
(Mechanische Schwingungen - Messung und Bewertung der Einwirkung von Schwingungen auf das Hand-Arm-System des Menschen - Teil 1: Allgemeine Anforderungen.)

Verfügbare Sprachen: Deutsch, Englisch

Verfügbare Ausführung: PDF - sofortiges Download, Gedruckt

ab 91.00 EUR weitere informationen
DIN EN ISO 5349-2:2015-12 (1.12.2015)

DIN EN ISO 5349-2:2015-12 (01.12.2015)

Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 2: Practical guidance for measurement at the workplace.
(Mechanische Schwingungen - Messung und Bewertung der Einwirkung von Schwingungen auf das Hand-Arm-System des Menschen - Teil 2: Praxisgerechte Anleitung zur Messung am Arbeitsplatz.)

Verfügbare Sprachen: Deutsch, Englisch

Verfügbare Ausführung: PDF - sofortiges Download, Gedruckt

ab 140.00 EUR weitere informationen
DIN EN ISO 5349-3:2026-03 (1.3.2026)

DIN EN ISO 5349-3:2026-03 (01.03.2026)

Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 3: Isolated and repeated shocks using the frequency range of ISO 5349-1.
(Mechanische Schwingungen - Messung und Bewertung der Einwirkung von Schwingungen auf das Hand-Arm-System des Menschen - Teil 3: Isolierte und wiederholte Stöße im Frequenzbereich der ISO 5349-1.)

Verfügbare Sprachen: Deutsch, Englisch

Verfügbare Ausführung: PDF - sofortiges Download, Gedruckt

ab 98.30 EUR weitere informationen
DIN 53497:2017-04 (1.4.2017)

DIN 53497:2017-04 (01.04.2017)

Testing of plastics - Hot storage test on mouldings made of thermoplastic moulding materials without external mechanical stressing.
(Prüfung von Kunststoffen - Warmlagerungsversuch an Formteilen aus thermoplastischen Formmassen, ohne äußere mechanische Beanspruchung.)

Verfügbare Sprachen: Deutsch, Englisch

Verfügbare Ausführung: PDF - sofortiges Download, Gedruckt

ab 41.80 EUR weitere informationen
Loading
Cookies Cookies

Potřebujeme Váš souhlas k využití jednotlivých dat, aby se Vám mimo jiné mohli ukazovat informace týkající se Vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.

Souhlas můžete odmítnout zde.

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme Váš souhlas k využití jednotlivých dat, aby se Vám mimo jiné mohli ukazovat informace týkající se Vašich zájmů.