VDE - Deutsche Normen

Seite 302

23634 gefundene Produkte
Ordnen nach:
  • Relevanz
    • Relevanz
    • Datum (das neueste)
    • Datum (das älteste)
DIN EN IEC 61169-1-6:2023-10 (1.10.2023)

DIN EN IEC 61169-1-6:2023-10 (01.10.2023)

VDE 0887-969-1-6. Radio-frequency connectors - Part 1-6: Electrical test methods - RF power.
(VDE 0887-969-1-6. Hochfrequenz-Steckverbinder - Teil 1-6: Elektrische Prüfverfahren - HF-Leistung.)

Verfügbare Sprachen: Deutsch

Verfügbare Ausführung: Gedruckt

ab 61.50 EUR weitere informationen
DIN EN IEC 61169-1-9:2025-11 (1.11.2025)

DIN EN IEC 61169-1-9:2025-11 (01.11.2025)

VDE 0887-969-1-9. Radio-frequency connectors - Part 1-9: Mechanical test methods - Safety wire hole pull-out.
(VDE 0887-969-1-9. Hochfrequenz-Steckverbinder - Teil 1-9: Mechanische Prüfverfahren - Herausziehen von Sicherheitsdrahtlöchern.)

Verfügbare Sprachen: Deutsch

Verfügbare Ausführung: Gedruckt

ab 43.90 EUR weitere informationen
DIN EN 61169-1:2014-05 (1.5.2014)

DIN EN 61169-1:2014-05 (01.05.2014)

VDE 0887-969-1. Radio-frequency connectors - Part 1: Generic specification - General requirements and measuring methods.
(VDE 0887-969-1. Hochfrequenz-Steckverbinder - Teil 1: Fachgrundspezifikation - Allgemeine Anforderungen und Messverfahren.)

Verfügbare Sprachen: Deutsch

Verfügbare Ausführung: Gedruckt

ab 156.10 EUR weitere informationen
DIN EN IEC 61169-10:2024-09 (1.9.2024)

DIN EN IEC 61169-10:2024-09 (01.09.2024)

VDE 0887-969-10. Radio-frequency connectors - Part 10: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 3 mm (0,12 in) with snap-on coupling - Characteristic impedance 50 (+-) (Type SMB).
(VDE 0887-969-10. Hochfrequenz-Steckverbinder - Teil 10: Hochfrequenz-Koaxialsteckverbinder mit einem Innen-/Außenleiterdurchmesser von 3 mm (0,12 Zoll) mit Schnappkupplung - Wellenwiderstand 50 (+-) (Typ SMB).)

Verfügbare Sprachen: Deutsch

Verfügbare Ausführung: Gedruckt

ab 89.30 EUR weitere informationen
DIN EN 61169-11:2018-01 (1.1.2018)

DIN EN 61169-11:2018-01 (01.01.2018)

VDE 0887-969-11. Radio-frequency connectors - Part 11: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 9,5 mm with threaded coupling - Characteristic impedance 50 (Ohm) (type 4,1-9,5).
(VDE 0887-969-11. Hochfrequenz-Steckverbinder - Teil 11: Rahmenspezifikation für koaxile HF-Steckverbinder mit 9,5 mm Innendurchmesser des Außenleiters und Schraubverriegelung - Wellenwiderstand 50 (Ohm) (Typ 4,1-9,5).)

Verfügbare Sprachen: Deutsch

Verfügbare Ausführung: Gedruckt

ab 85.00 EUR weitere informationen
DIN EN IEC 61169-15:2022-09 (1.9.2022)

DIN EN IEC 61169-15:2022-09 (01.09.2022)

VDE 0887-969-15. Radio-frequency connectors - Part 15: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 4,13 mm (0,163 in) with threaded coupling - Characteristic impedance 50 < OMEGA > (type SMA).
(VDE 0887-969-15. Hochfrequenz-Steckverbinder - Teil 15: Rahmenspezifikation - Koaxiale Hochfrequenzsteckverbinder mit 4,13 mm (0,163 in) Innendurchmesser des Außenleiters mit Schraubverriegelung - Wellenwiderstand 50 < OMEGA > (Typ SMA).)

Verfügbare Sprachen: Deutsch

Verfügbare Ausführung: Gedruckt

ab 97.40 EUR weitere informationen
DIN EN IEC 61169-17:2024-02 (1.2.2024)

DIN EN IEC 61169-17:2024-02 (01.02.2024)

VDE 0887-969-17. Radio-frequency connectors - Part 17: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with screw coupling - Characteristic impedance 50 ohms (Type TNC).
(VDE 0887-969-17. Hochfrequenz-Steckverbinder - Teil 17: Hochfrequenz-Koaxial-Steckverbinder mit einem Innendurchmesser des Außenleiters von 6,5 mm (0,256 in) mit Schraubkupplung - Wellenwiderstand 50 Ohm (Typ TNC).)

Verfügbare Sprachen: Deutsch

Verfügbare Ausführung: Gedruckt

ab 93.40 EUR weitere informationen
DIN EN IEC 61169-21:2024-02 (1.2.2024)

DIN EN IEC 61169-21:2024-02 (01.02.2024)

VDE 0887-969-21. Radio-frequency connectors - Part 21: Sectional specification for RF connectors with inner diameter of outer conductor 9,5 mm (0,374 in) with screw coupling - Characteristic impedance 50 ohms (Type SC).
(VDE 0887-969-21. Hochfrequenz-Steckverbinder - Teil 21: Rahmenspezifikation für HF-Steckverbinder mit einem Innen-/Außenleiterdurchmesser von 9,5 mm mit Schraubkupplung - Wellenwiderstand 50 Ohm (Typ SC).)

Verfügbare Sprachen: Deutsch

Verfügbare Ausführung: Gedruckt

ab 100.90 EUR weitere informationen
DIN EN IEC 61169-24:2021-03 (1.3.2021)

DIN EN IEC 61169-24:2021-03 (01.03.2021)

VDE 0887-969-24. Radio-frequency connectors - Part 24: Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 < OMEGA > cable networks (type F).
(VDE 0887-969-24. Hochfrequenz-Steckverbinder - Teil 24: Rahmenspezifikation - Koaxiale Hochfrequenzsteckverbinder mit Schraubkupplung, vorzugsweise für den Einsatz in 75 Ohm Kabelnetzen (Typ F).)

Verfügbare Sprachen: Deutsch

Verfügbare Ausführung: Gedruckt

ab 93.40 EUR weitere informationen
DIN EN 61169-26:2013-10 (1.10.2013)

DIN EN 61169-26:2013-10 (01.10.2013)

VDE 0887-969-26. Radio-frequency connectors - Part 26: Sectional specification for TNCA series RF coaxial connectors.
(VDE 0887-969-26. Hochfrequenz-Steckverbinder - Teil 26: Rahmenspezifikation für koaxiale HF-Steckverbinder der TNCA-Serie.)

Verfügbare Sprachen: Deutsch

Verfügbare Ausführung: Gedruckt

ab 85.00 EUR weitere informationen
Loading
Cookies Cookies

Potřebujeme Váš souhlas k využití jednotlivých dat, aby se Vám mimo jiné mohli ukazovat informace týkající se Vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.

Souhlas můžete odmítnout zde.

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme Váš souhlas k využití jednotlivých dat, aby se Vám mimo jiné mohli ukazovat informace týkající se Vašich zájmů.