ISO - Internationale Organisation für Standardisierung

Seite 1825

26342 gefundene Produkte
Ordnen nach:
  • Relevanz
    • Relevanz
    • Datum (das neueste)
    • Datum (das älteste)
ISO 3001:1999-ed.4.0 (11.2.1999)

ISO 3001:1999-ed.4.0 (11.02.1999)

Plastics — Epoxy compounds — Determination of epoxy equivalent
(Plastiques — Compositions époxydiques — Détermination de l´équivalent époxy)

Verfügbare Sprachen: Englisch, Französisch

Verfügbare Ausführung: Elektronische PDF, Gedruckt

ab 57.10 EUR weitere informationen
ISO 30011:2025-ed.2.0 (8.8.2025)

ISO 30011:2025-ed.2.0 (08.08.2025)

Workplace air — Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry
(Air des lieux de travail — Détermination des métaux et métalloides dans les particules en suspension dans l´air par spectrométrie de masse avec plasma a couplage inductif)

Verfügbare Sprachen: Englisch, Französisch

Verfügbare Ausführung: Elektronische PDF, Gedruckt

ab 206.40 EUR weitere informationen
ISO 30012:2016 (29.1.2016)

ISO 30012:2016 (29.01.2016)

Carbon-fibre-reinforced plastics — Determination of the size and aspect ratio of crushed objects
(Plastiques renforcés de fibres de carbone — Détermination des dimensions et du rapport d´apparence d´objets broyés)

Verfügbare Sprachen: Englisch

Verfügbare Ausführung: Elektronische PDF, Gedruckt

ab 87.00 EUR weitere informationen
ISO 30012:2016/Amd1:2018 (9.5.2018)

ISO 30012:2016/Amd1:2018 (09.05.2018) Change

Carbon-fibre-reinforced plastics — Determination of the size and aspect ratio of crushed objects — Amendment 1
(Plastiques renforcés de fibres de carbone — Détermination des dimensions et du rapport d´apparence d´objets broyés — Amendement 1)

Verfügbare Sprachen: Englisch

Verfügbare Ausführung: Elektronische PDF, Gedruckt

ab 23.40 EUR weitere informationen
ISO 30013:2011 (6.10.2011)

ISO 30013:2011 (06.10.2011)

Rubber and plastics hoses — Methods of exposure to laboratory light sources — Determination of changes in colour, appearance and other physical properties
(Tuyaux en caoutchouc et en plastique — Méthodes d´exposition a des sources lumineuses de laboratoire — Détermination du changement de coloration, d´aspect et d´autres propriétés physiques)

Verfügbare Sprachen: Englisch, Französisch

Verfügbare Ausführung: Elektronische PDF, Gedruckt

ab 175.30 EUR weitere informationen
ISO 3002-1:1982-ed.2.0 (1.8.1982)

ISO 3002-1:1982-ed.2.0 (01.08.1982)

Basic quantities in cutting and grinding — Part 1: Geometry of the active part of cutting tools — General terms, reference systems, tool and working angles, chip breakers
(Grandeurs de base pour la coupe et la rectification — Partie 1: Géométrie de la partie active des outils coupants — Notions générales, systeme de référence, angles de l´outil et angles en travail, brise-copeaux)

Verfügbare Sprachen: Englisch, Französisch

Verfügbare Ausführung: Elektronische PDF, Gedruckt

ab 264.90 EUR weitere informationen
ISO 3002-1:1982-ed.2.0/Amd1:1992 (25.11.1992)

ISO 3002-1:1982-ed.2.0/Amd1:1992 (25.11.1992) Change

Basic quantities in cutting and grinding — Part 1: Geometry of the active part of cutting tools — General terms, reference systems, tool and working angles, chip breakers — Amendment 1
(Grandeurs de base pour la coupe et la rectification — Partie 1: Géométrie de la partie active des outils coupants — Notions générales, systeme de référence, angles de l´outil et angles en travail, brise-copeaux — Amendement 1)

Verfügbare Sprachen: Englisch, Französisch

Verfügbare Ausführung: Elektronische PDF, Gedruckt

ab 23.40 EUR weitere informationen
ISO 3002-2:1982 (1.3.1982)

ISO 3002-2:1982 (01.03.1982)

Basic quantities in cutting and grinding — Part 2: Geometry of the active part of cutting tools — General conversion formulae to relate tool and working angles
(Définitions de base pour la coupe et la rectification — Partie 2: Géométrie de la partie active des outils coupants — Formules de conversion générales liant les angles de l´outil en main et les angles en travail)

Verfügbare Sprachen: Englisch, Französisch

Verfügbare Ausführung: Elektronische PDF, Gedruckt

ab 206.40 EUR weitere informationen
ISO 3002-3:1984 (1.10.1984)

ISO 3002-3:1984 (01.10.1984)

Basic quantities in cutting and grinding — Part 3: Geometric and kinematic quantities in cutting
(Grandeurs de base en usinage et rectification — Partie 3: Grandeurs géométriques et cinématiques en usinage)

Verfügbare Sprachen: Englisch, Französisch

Verfügbare Ausführung: Elektronische PDF, Gedruckt

ab 87.00 EUR weitere informationen
ISO 3002-4:1984 (1.11.1984)

ISO 3002-4:1984 (01.11.1984)

Basic quantities in cutting and grinding — Part 4: Forces, energy, power
(Grandeurs de base en usinage et rectification — Partie 4: Forces, énergie et puissance)

Verfügbare Sprachen: Englisch, Französisch

Verfügbare Ausführung: Elektronische PDF, Gedruckt

ab 87.00 EUR weitere informationen
Loading
Cookies Cookies

Potřebujeme Váš souhlas k využití jednotlivých dat, aby se Vám mimo jiné mohli ukazovat informace týkající se Vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.

Souhlas můžete odmítnout zde.

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme Váš souhlas k využití jednotlivých dat, aby se Vám mimo jiné mohli ukazovat informace týkající se Vašich zájmů.