STN - Slowakische nationale Normen

Seite 302

77624 gefundene Produkte
Ordnen nach:
  • Relevanz
    • Relevanz
    • Datum (das neueste)
    • Datum (das älteste)
STN EN ISO 10683 (1.10.2014)

STN EN ISO 10683 (01.10.2014) Ungültige

Fasteners - Non-electrolytically applied zinc flake coatings (ISO 10683:2014)

Verfügbare Ausführung: Gedruckt

STN EN ISO 10683 (1.7.2002)

STN EN ISO 10683 (01.07.2002) Ungültige

Fasteners. Non-electrolytically appied zinc flake coatings (ISO 10683:2000)

Verfügbare Ausführung: Gedruckt

STN EN ISO 4759-1 (1.9.2002)

STN EN ISO 4759-1 (01.09.2002)

Tolerances for fasteners. Part 1: Bolts, screws, studs and nuts. Product grades A, B and C (ISO 4759-1:2000)

Verfügbare Sprachen: Tschechisch

Verfügbare Ausführung: Gedruckt

STN EN ISO 4759-3 (1.3.2017)

STN EN ISO 4759-3 (01.03.2017)

Tolerances for fasteners. Part 3: Washers for bolts, screws and nuts. Product grades A, C and F

Verfügbare Sprachen: Slowakisch

Verfügbare Ausführung: Gedruckt

STN EN ISO 4759-1 (1.10.2001)

STN EN ISO 4759-1 (01.10.2001) Ungültige

Tolerances for fasteners. Part 1: Bolts, screws, studs and nuts. Product grades A, B and C (ISO 4759-1:2000)

Verfügbare Ausführung: Gedruckt

STN EN ISO 4759-3 (1.10.2001)

STN EN ISO 4759-3 (01.10.2001) Ungültige

Tolerances for fasteners. Part 3: Plain washers for bolts, screws and nuts. Products grades A and C (ISO 4759-3:2000)

Verfügbare Ausführung: Gedruckt

STN EN ISO 4759-3 (1.11.2016)

STN EN ISO 4759-3 (01.11.2016) Ungültige

Tolerances for fasteners - Part 3: Washers for bolts, screws and nuts - Product grades A, C and F (ISO 4759-3:2016)

Verfügbare Ausführung: Gedruckt

STN EN ISO 4759-3 (1.9.2002)

STN EN ISO 4759-3 (01.09.2002) Ungültige

Tolerances for fasteners. Part 3: Plain washers for bolts, screws and nuts. Products grades A and C (ISO 4759-3:2000)

Verfügbare Ausführung: Gedruckt

STN EN 26157-1 (1.6.2001)

STN EN 26157-1 (01.06.2001)

Fasteners. Surface discontinuities. Part 1: Bolts, screws and studs for general requirements

Verfügbare Sprachen: Slowakisch

Verfügbare Ausführung: Gedruckt

STN EN ISO 6157-2 (1.4.2005)

STN EN ISO 6157-2 (01.04.2005)

Fasteners. Surface discontinuities. Part 2: Nuts (ISO 6157-2:1992)

Verfügbare Sprachen: Slowakisch

Verfügbare Ausführung: Gedruckt

Loading
Cookies Cookies

Potřebujeme Váš souhlas k využití jednotlivých dat, aby se Vám mimo jiné mohli ukazovat informace týkající se Vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.

Souhlas můžete odmítnout zde.

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme Váš souhlas k využití jednotlivých dat, aby se Vám mimo jiné mohli ukazovat informace týkající se Vašich zájmů.