STN - Slowakische nationale Normen

Seite 3804

78174 gefundene Produkte
Ordnen nach:
  • Relevanz
    • Relevanz
    • Datum (das neueste)
    • Datum (das älteste)
STN EN ISO 9443 (1.2.2019)

STN EN ISO 9443 (01.02.2019)

Surface quality classes for hot-rolled bars and wire rod (ISO 9443:2018)

Verfügbare Sprachen: Englisch

Verfügbare Ausführung: Gedruckt

STN EN 10221 (1.9.1998)

STN EN 10221 (01.09.1998) Ungültige

Surface quality classes for hot-rolled bars and rods. Technical delivery conditions

Verfügbare Ausführung: Gedruckt

STN 420021 (1.9.1979)

STN 420021 (01.09.1979) Ungültige

Steel tubes. Asphalt damp-proof insulation of tubes below Nd 50

Verfügbare Ausführung: Gedruckt

STN 420022 (1.6.1976)

STN 420022 (01.06.1976) Ungültige

Steel tubes. Asphalt damp-proof insulation of tubes from Nd 50, incl.

Verfügbare Ausführung: Gedruckt

STN EN 10067 (1.12.2000)

STN EN 10067 (01.12.2000)

Hot rolled bulb flats. Dimensions and tolerances on shape, dimensions and mass

Verfügbare Sprachen: Englisch

Verfügbare Ausführung: Gedruckt

STN 420030 (1.11.1995)

STN 420030 (01.11.1995)

Steel and cast iron scrap

Verfügbare Sprachen: Tschechisch

Verfügbare Ausführung: Gedruckt

STN EN ISO 21809-5 (1.4.2018)

STN EN ISO 21809-5 (01.04.2018)

Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 5: External concrete coatings (ISO 21809-5:2017)

Verfügbare Sprachen: Englisch

Verfügbare Ausführung: Gedruckt

STN EN ISO 21809-5 (1.10.2010)

STN EN ISO 21809-5 (01.10.2010) Ungültige

Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 5: External concrete coatings (ISO 21809-5:2010)

Verfügbare Ausführung: Gedruckt

STN EN 10056-1 (1.6.2017)

STN EN 10056-1 (01.06.2017)

Structural steel equal and unequal leg angles - Part 1: Dimensions

Verfügbare Sprachen: Englisch

Verfügbare Ausführung: Gedruckt

STN EN 10056-2 (1.11.1998)

STN EN 10056-2 (01.11.1998)

Structural steel equal and unequal leg angles. Part 2: Tolerances on shape and dimensions

Verfügbare Sprachen: Slowakisch

Verfügbare Ausführung: Gedruckt

Loading
Cookies Cookies

Potřebujeme Váš souhlas k využití jednotlivých dat, aby se Vám mimo jiné mohli ukazovat informace týkající se Vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.

Souhlas můžete odmítnout zde.

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme Váš souhlas k využití jednotlivých dat, aby se Vám mimo jiné mohli ukazovat informace týkající se Vašich zájmů.