STN - Slowakische nationale Normen

Seite 866

77800 gefundene Produkte
Ordnen nach:
  • Relevanz
    • Relevanz
    • Datum (das neueste)
    • Datum (das älteste)
STN EN 60534-8-4 (1.5.2016)

STN EN 60534-8-4 (01.05.2016)

Industrial-process control valves - Part 8-4: Noise considerations - Prediction of noise generated by hydrodynamic flow

Verfügbare Sprachen: Englisch

Verfügbare Ausführung: Gedruckt

STN EN 60534-9 (1.4.2008)

STN EN 60534-9 (01.04.2008)

Industrial-process control valves - Part 9: Test procedure for response measurements from step inputs

Verfügbare Sprachen: Englisch

Verfügbare Ausführung: Gedruckt

STN 134509-1 (1.12.1988)

STN 134509-1 (01.12.1988) Ungültige

Industrial fittings. Methods of regulation valve measurement. Terminology. Basic requirements and rules

Verfügbare Ausführung: Gedruckt

STN EN 60534-1 (1.11.2005)

STN EN 60534-1 (01.11.2005) Ungültige

Industrial-process control valves. Part 1: Control valve terminology and general considerations

Verfügbare Ausführung: Gedruckt

STN EN 60534-1 (1.7.2006)

STN EN 60534-1 (01.07.2006) Ungültige

Industrial-process control valves. Part 1: Control valve terminology and general considerations

Verfügbare Ausführung: Gedruckt

STN EN 60534-1 (1.8.1999)

STN EN 60534-1 (01.08.1999) Ungültige

Industrial-process control valves. Part 1: Control valve terminology and general considerations

Verfügbare Ausführung: Gedruckt

STN 134509-2 (1.7.1985)

STN 134509-2 (01.07.1985) Ungültige

Industrial fittings. Methods for the measurement of control valves. Sizing equations for incompressible fluids flow

Verfügbare Ausführung: Gedruckt

STN EN 60534-2-1 (1.8.2001)

STN EN 60534-2-1 (01.08.2001) Ungültige

Industrial-process control valves. Part 2-1: Flow capacity. Sizing equations for fluid flow under installed conditions

Verfügbare Ausführung: Gedruckt

STN EN 60534-2-3 (1.11.2003)

STN EN 60534-2-3 (01.11.2003) Ungültige

Industrial-process control valves. Part 2-3: Flow capacity. Test procedures

Verfügbare Ausführung: Gedruckt

STN EN 60534-2-5 (1.5.2004)

STN EN 60534-2-5 (01.05.2004) Ungültige

Industrial-process control valves Part 2-5: Flow capacity – Sizing equations for fluid flow through multistage control valves with interstage recovery

Verfügbare Ausführung: Gedruckt

Loading
Cookies Cookies

Potřebujeme Váš souhlas k využití jednotlivých dat, aby se Vám mimo jiné mohli ukazovat informace týkající se Vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.

Souhlas můžete odmítnout zde.

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme Váš souhlas k využití jednotlivých dat, aby se Vám mimo jiné mohli ukazovat informace týkající se Vašich zájmů.