UNE - Spanische nationale Normen

Seite 1544

64953 gefundene Produkte
Ordnen nach:
  • Relevanz
    • Relevanz
    • Datum (das neueste)
    • Datum (das älteste)
UNE-EN ISO 25424:2020 (14.10.2020)

UNE-EN ISO 25424:2020 (14.10.2020)

Sterilization of health care products - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 25424:2018)

Verfügbare Sprachen: Englisch, Spanisch

Verfügbare Ausführung: Elektronische PDF, Gedruckt

ab 115.60 EUR weitere informationen
UNE-EN ISO 25424:2020/A1:2022 (21.12.2022)

UNE-EN ISO 25424:2020/A1:2022 (21.12.2022) Change

Sterilization of health care products - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices - Amendment 1 (ISO 25424:2018/Amd 1:2022)

Verfügbare Sprachen: Englisch, Spanisch

Verfügbare Ausführung: Elektronische PDF, Gedruckt

ab 59.80 EUR weitere informationen
UNE-EN 2543:2009 (1.4.2009)

UNE-EN 2543:2009 (01.04.2009)

Aerospace series - Steel FE-PL1502 (25CrMo4) - Annealed - Sheet and strip - 0,3 mm = a = 2 mm - For prevailing torque nuts (Endorsed by AENOR in April of 2009.)

Verfügbare Sprachen: Englisch

Verfügbare Ausführung: Elektronische PDF, Gedruckt

ab 31.40 EUR weitere informationen
UNE-EN 2545-1:1996 (19.6.1996)

UNE-EN 2545-1:1996 (19.06.1996)

AEROSPACE SERIES. TITANIUM AND TITANIUM ALLOY REMELTING STOCK AND CASTings. Technical specification. Part 1: General requirements.

Verfügbare Sprachen: Englisch, Spanisch

Verfügbare Ausführung: Elektronische PDF, Gedruckt

ab 54.90 EUR weitere informationen
UNE-EN 2545-2:1996 (19.6.1996)

UNE-EN 2545-2:1996 (19.06.1996)

AEROSPACE SERIES. TITANIUM AND TITANIUM ALLOY REMELTING STOCK AND CASTings. Technical specifications. Part 2: Remelting stock.

Verfügbare Sprachen: Englisch, Spanisch

Verfügbare Ausführung: Elektronische PDF, Gedruckt

ab 40.20 EUR weitere informationen
UNE-EN 2545-3:1996 (14.6.1996)

UNE-EN 2545-3:1996 (14.06.1996)

AEROSPACE SERIES. TITANIUM AND TITANIUM ALLOY REMELTING STOCK AND CASTINGS. TECHNICAL SPECIFICATION. PART 3: PRE-PRODUCTION AND PRODUCTION CASTINGS.

Verfügbare Sprachen: Englisch, Spanisch

Verfügbare Ausführung: Elektronische PDF, Gedruckt

ab 65.70 EUR weitere informationen
UNE-EN ISO 25457:2023 (1.12.2023)

UNE-EN ISO 25457:2023 (01.12.2023)

Oil and gas industries including lower carbon energy - Flare details for general refinery and petrochemical service (ISO 25457:2023) (Endorsed by Asociación Espanola de Normalización in December of 2023.)

Verfügbare Sprachen: Englisch

Verfügbare Ausführung: Elektronische PDF, Gedruckt

ab 29.40 EUR weitere informationen
UNE-EN 2546:2006 (1.7.2006)

UNE-EN 2546:2006 (01.07.2006)

Aerospace series - Washers, lock with radial serrations in corrosion resisting steel passivated for flight control rods - Dimensions (Endorsed by AENOR in July of 2006.)

Verfügbare Sprachen: Englisch

Verfügbare Ausführung: Elektronische PDF, Gedruckt

ab 35.30 EUR weitere informationen
UNE-EN 2549:2006 (1.7.2006)

UNE-EN 2549:2006 (01.07.2006)

Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 315 °C (Endorsed by AENOR in July of 2006.)

Verfügbare Sprachen: Englisch

Verfügbare Ausführung: Elektronische PDF, Gedruckt

ab 50.00 EUR weitere informationen
UNE-EN 2550:1993 (23.11.1993)

UNE-EN 2550:1993 (23.11.1993)

AEROSPACE SERIES. RIVETS, SOLID, 100o NORMAL COUNTERSUNK HEAD, IN ALUMINIUM 1050A, INCH BASED SERIES.

Verfügbare Sprachen: Englisch, Spanisch

Verfügbare Ausführung: Elektronische PDF, Gedruckt

ab 40.20 EUR weitere informationen
Loading
Cookies Cookies

Potřebujeme Váš souhlas k využití jednotlivých dat, aby se Vám mimo jiné mohli ukazovat informace týkající se Vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.

Souhlas můžete odmítnout zde.

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme Váš souhlas k využití jednotlivých dat, aby se Vám mimo jiné mohli ukazovat informace týkající se Vašich zájmů.