ASTM A234/A234M-25

Detail information

Designation: ASTM A234/A234M-25

Publication date: 01/09/2025

Pages: 10

Country: American technical standard

Where to buy?

You can buy at www.mystandards.biz

Anotation

This specification covers wrought carbon steel and alloy steel fittings of seamless and welded construction. These fittings are for use in pressure piping and in pressure vessel fabrication for service at moderate and elevated temperatures. The material for fittings shall consist of killed steel, forgings, bars, plates, seamless or fusion-welded tubular products with filler metal added. Forging or shaping operations may be performed by hammering, pressing, piercing, extruding, upsetting, rolling, bending, fusion welding, machining, or by a combination of two or more of these operations. The forming procedure shall be so applied that it will not produce injurious imperfections in the fittings. Fittings, after forming at an elevated temperature, shall be cooled to a temperature below the critical range under suitable conditions to prevent injurious defects caused by too rapid cooling, but in no case more rapidly than the cooling rate in still air. The fittings shall be subjected to tension test, hardness test, and hydrostatic test.


Keywords:
pipe fittings—steel, piping applications, pressure containing parts, pressure vessel service, temperature service applications—elevated,, ICS Number Code 23.040.40 (Metal fittings)