ASTM D6262-23

Detail information

Designation: ASTM D6262-23

Publication date: 01/08/2023

Pages: 7

Country: American technical standard

Where to buy?

You can buy at www.mystandards.biz

Anotation

This specification covers requirements and methods of test for the material, dimensions, and workmanship, and the properties of extruded, compression molded, and injection molded PAEK sheet, plate, rod, and tubular bar manufactured from PAEK. The type of PAEK extruded, compression molded, and injection molded product may be categorized by type, grade and class depending on resin and filler compositions. Every type of PAEK shape may be categorized into one of several grades as follows: Grade 1 (general purpose) which is extruded, compression molded or injection molded product made using only 100% virgin PAEK resin and Grade 2 (recycle grade) which is extruded, compression molded or injection molded product made using any amount up to 100% of recycled thermoplastic PAEK. The type, class and grade is further differentiated based on dimensional stability. Different tests shall be conducted in order to determine the following properties of PAEK: tensile stress at break, elongation at break, tensile modulus, dimensional stability, lengthwise camber and widthwise bow, squareness, flexural modulus, and Izod impact.


Keywords:
PAEK, PEEK, PEKK, plates–PAEK, recycled–PAEK, recycled plastic, rod-PAEK, shapes–PAEK, sheet-PAEK, tubular bar-PAEK,, ICS Number Code 83.140.99 (Other rubber and plastic products)