Cookies
Potřebujeme Váš souhlas k využití jednotlivých dat, aby se Vám mimo jiné mohli ukazovat informace týkající se Vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Active standard | Published: 01/07/2015
ČSN EN 4826
Aerospace series - Zinc-Nickel (12 %-16 % Ni) plating of steels with specified tensile strength . 1 450 MPa, copper alloys, nickel alloys and aluminium alloys for parts and fasteners
Available languages: English
Available design: Print design
from 9.20 EUR
show on eshop
Detail information
Designation: ČSN EN 4826
Publication date: 01/07/2015
Pages: 20
Country: Czech technical standard
Where to buy?
You can buy at www.mystandards.bizAnotation
This European Standard specifies the plating of a Zinc-Nickel (12 % to 16 %) alloy on mechanical parts and fasteners in steels (Rm <= 1 450 MPa), stainless steels (Rm <= 1 450 MPa), copper alloys, nickel alloys and aluminium alloys (not applicable for electrical components), as well as the passivation and lubricant finishing that can be associated to them. The Zinc-Nickel process is an electrolytic plating process under controlled current allowing to deposit a Zinc-Nickel layer from, most often, an alkaline electrolyte. Alkaline Zinc-Nickel is only considered in this standard.The purpose of this standard is to give technical and quality requirements of Zinc-Nickel plating. It doesn´t give complete in-house process instructions, these shall be given in the manufacturers detailed process instructions
Popular Publishers
DIN standards
BS standards
ASTM standards
ISO standards
IEC standards
Copyright © All rights reserved | This template is made with by Colorlib
