IEC 60092-350-ed.5.0

Detail information

Designation: IEC 60092-350-ed.5.0

Publication date: 28/01/2020

Pages: 0

Country: International technical standard

Where to buy?

You can buy at www.mystandards.biz

Anotation

IEC 60092-350:2020 provides the general constructional requirements and test methods for use in the manufacture of electric power, control and instrumentation cables with copper conductors intended for fixed electrical systems at voltages up to and including 18/30(36) kV on board ships and offshore (mobile and fixed) units. The reference to fixed systems includes those that are subjected to vibration (due to the movement of the ship or installation) or movement (due to motion of the ship or installation) and not to those that are intended for frequent flexing. Cables suitable for frequent or continual flexing use are detailed in other IEC standards, for example IEC 60227 (all parts) and IEC 60245 (all parts), and their uses are restricted to those situations which do not directly involve exposure to a marine environment, for example, portable tools and domestic appliances. The following types of cables are not included: - optical fibre; - sub-sea and umbilical cables; - data and communication cables; - coaxial cables. This fifth edition cancels and replaces the fourth edition published in 2014 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) more detailed description of the test procedures in 7.7.6 and 7.7.7; b) description of the relationship between Annex A and Annex D. LIEC 60092-350:2020 fournit les exigences generales de construction et les methodes dessai a utiliser lors de la fabrication des cables denergie, de commande et dinstrumentation a ames en cuivre destines a la connexion de systemes electriques fixes a une tension au plus egale a 18/30(36) kV installes a bord des navires et des unites en mer (mobiles et fixes). Les installations fixes incluent les systemes qui sont soumis a des vibrations (sous laction du mouvement du navire ou de linstallation) ou des mouvements (sous laction du deplacement du navire ou de linstallation), mais pas ceux qui sont prevus pour subir des flexions frequentes. Les cables prevus pour subir des flexions frequentes ou continues sont decrits dans dautres normes IEC (IEC 60227 (toutes les parties) et IEC 60245 (toutes les parties), par exemple), et leurs utilisations se limitent a celles nimpliquant pas directement une exposition a un environnement marin (outils portatifs et appareils domestiques, par exemple). Les types de cables suivants ne sont pas couverts: - cables a fibres optiques; - cables sous-marins et ombilicaux; - cables de donnees et de communication; - cables coaxiaux. Cette cinquieme edition annule et remplace la quatrieme edition parue en 2014. Cette edition constitue une revision technique. Cette edition inclut les modifications techniques majeures suivantes par rapport a ledition precedente: a) description plus detaillee des procedures dessai donnees en 7.7.6 et 7.7.7; b) description de la relation entre lAnnexe A et lAnnexe D.