IEC 61000-4-25-ed.1.2+Amd.1+Amd.2-CSV

Detail information

Designation: IEC 61000-4-25-ed.1.2+Amd.1+Amd.2-CSV

Publication date: 11/12/2019

Pages: 188

Country: International technical standard

Where to buy?

You can buy at www.mystandards.biz

Anotation

IEC 61000-4-25:2001+A1:2012+A2:2019 describe immunity test levels and related test methods for electrical and electronic equipment and systems exposed to high-altitude electromagnetic pulse (HEMP) environments. Specifications for test equipment and instrumentation test set-up, test procedures, pass/fail criteria, and test documentation requirements are also defined by this standard. These tests are intended to demonstrate the immunity of electrical and electronic equipment when subjected to HEMP radiated and conducted electromagnetic disturbances. The objective of this part of IEC 61000 is to establish a common and reproducible basis for evaluating the performance of electrical and electronic equipment, when subjected to HEMP radiated environments and the associated conducted transients on power, antenna, and input/output (I/O) signal and control lines. The amendment 1 introduces the damped sinusoidal wave standard recently published IEC 61000-4-18. This consolidated version consists of the first edition (2001), its amendment 1 (2012) and its amendment 2 (2019). Therefore, no need to order amendment in addition to this publication. LIEC 61000-4-25:2001+A1:2012+A2:2019 decrit les niveaux dessai pour limmunite et les methodes dessai correspondantes applicables aux appareils et aux systemes electriques et electroniques exposes a lenvironnement des impulsions electromagnetiques nucleaires a haute altitude (IEMN-HA). Cette norme definit egalement les specifications pour les materiels et la configuration dessai, les procedures dessai, les criteres dacceptation ou de rejet et les prescriptions pour la documentation dessai. Ces essais sont destines a demontrer limmunite des appareils electriques et electroniques aux perturbations electromagnetiques IEMN-HA rayonnees et conduites. Lobjectif de cette partie de lIEC 61000 est detablir une base commune et reproductible pour levaluation des performances des appareils electriques et electroniques, lorsquils sont soumis a lenvironnement dIEMN-HA rayonnees ainsi que de transitoires conduits associes sur les reseaux dalimentation electrique, les antennes, les signaux dentree/sortie (E/S) et les lignes de controle. LAmendement 1 introduit la norme sur les ondes oscillatoires amorties recemment publiee IEC 61000-4-18. Cette version consolidee comprend la premiere edition (2001), son amendement 1 (2012) et son amendement 2 (2019). Il nest donc pas necessaire de commander lamendement avec cette publication.