Active standard | Published: 19/06/1995

IEC 61076-4-105-ed.1.0

Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 105 : Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide range of applications including the telecommunication .
(Connecteurs sous assurance de la qualite, pour utilisation dans le cadre d´applications analogiques c.c. et a basse frequence et dans le cadre d´applications numeriques utilisant des debits eleves pour le transfert des donnees - Partie 4: Connecteurs pour cartes imprimees - Section 105: Specification particuliere d´un connecteur circulaire de 9 mm, de 3 a 8 contacts, a utiliser dans une large gamme d´applications incluant les telecommunications et le grand public)

Available languages: English and French

Available design: electronic design (pdf), Print design, CD-ROM

from 441.00 USD show on eshop

Detail information

Designation: IEC 61076-4-105-ed.1.0

Publication date: 19/06/1995

Pages: 89

Country: International technical standard

Where to buy?

You can buy at www.mystandards.biz

Anotation

IEC 61076-4-105:1995 is a detail specification. A complete connector consists of a fixed connector and a free connector. The fixed connector is mounted vertically or at a right angle to the printed circuit board. The free connector is terminated to a cable consisting of three to eight conductors (shielded or unshielded). The fixed and the free connector have a range of three to eight contacts. Each connector is keyed to prevent mismating. Examples of contact arrangements are shown in figure 2. Rating and characteristics: Wording voltage: 30 V a.c. r.m.s. or d.c. Current rating: 1 A max. Insulation resistance: 1 000 M ohms min. Climatic category: PL1: 55/100/56, PL2: 55/100/21, PL3: Not applicable Printed board thickness: 1,58 mm (0,062 in) Contact spacing: varies with number of contacts. IEC 61076-4-105:1995 est une specification particuliere. Un connecteur complet est constitue dune embase a sorties droites ou coudees pour carte imprimee. La fiche est raccordee a un cable de trois a huit conducteurs (blinde ou non). Lembase et la fiche ont de trois a huit contacts. Chaque connecteur est detrompe pour eviter les erreurs daccouplement. La figure 2 illustre des exemples de dispositions de contacts. Caracteristiques assignees: Tension de service: 30 V efficaces c.a. ou c.c. Courant normal: 1 A max. Resistance disolement: 1 000 MS-2 min. Categorie climatique: PLI : 55/100/56 PL2: 55/100/21 PL3: Sans objet Epaisseur de carte imprimee:1,58 mm (0,062 in) Pas des contacts: varie selon le nombre de contacts

Popular Publishers

full catalog