Active standard | Published: 09/12/2024

IEC 61188-6-3-ed.1.0

Circuit boards and circuit board assemblies - Design and use - Part 6-3: Land pattern design - Description of land pattern for through hole components (THT)
(Cartes imprimees et cartes imprimees equipees - Conception et utilisation - Partie 6-3: Conception de la zone de report - Description de la zone de report pour les composants a trous traversants (THT))

Available languages: English and French

Available design: electronic design (pdf), Print design, CD-ROM

from 8 211.80 CZK show on eshop

Detail information

Designation: IEC 61188-6-3-ed.1.0

Publication date: 09/12/2024

Pages: 62

Country: International technical standard

Where to buy?

You can buy at www.mystandards.biz

Anotation

IEC 61188-6-3:2024 specifies the requirements for lands and land pattern on circuit boards for the mounting of components with leads by soldering based on the solder joint requirements of IEC 61191-1 and IEC 61191-3. This part of IEC 61188 specifies the requirements for soldering surfaces on circuit boards. This includes lands and land pattern for surface mounted components and also solderable hole configurations for through hole mounted components. These requirements are based on the solder joint requirements of IEC 61191-1, IEC 61191-2, IEC 61191-3 and IEC 61191-4. This first edition partially cancels and replaces the IEC 61188-5 series of International Standards. The significant technical changes with respect to the previous edition are listed in the Introduction and further detailed information and calculations can be found in Annex A. L’IEC 61188-6-2:2024 specifie les exigences relatives aux pastilles et a la zone de report des cartes imprimees pour le montage par brasage des composants a pattes, basees sur les exigences relatives aux joints de brasure de l’IEC 61191-1 et de l’IEC 61191-3. La presente partie de l’IEC 61188 specifie les exigences relatives aux surfaces de brasage sur les cartes imprimees. Sont incluses les pastilles et la zone de report des composants montes en surface ainsi que les configurations de trous brasables pour les composants montes a trous traversants. Ces exigences reposent sur les exigences relatives aux joints de brasure des IEC 61191-1, IEC 61191-2, IEC 61191-3 et IEC 61191-4. Cette premiere edition annule partiellement et remplace la serie de Normes internationales IEC 61188-5. Les principales modifications techniques par rapport a l’edition precedente sont enumerees dans l’Introduction et des informations detaillees et des calculs complementaires sont fournis a l’Annexe A.

Popular Publishers

full catalog