IEC 61196-4-1-ed.2.0

Detail information

Designation: IEC 61196-4-1-ed.2.0

Publication date: 13/09/2022

Pages: 20

Country: International technical standard

Where to buy?

You can buy at www.mystandards.biz

Anotation

IEC 61196-4-1:2022 applies to radiating coaxial communication cables. These cables are intended for use in wireless communication system in long, narrow, semi-closed and indoor environment, such as tunnels, railways, highways, subways, elevators and other installations. This second edition cancels and replaces the first edition published in 2016. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a. rewrote "1 Scope" to be consistent with other blank detail specifications of coaxial cables; b. added detail construction requirements of inner and outer conductor in "[7] Cable construction"; c. added "Storage temperature range", "Installation temperature range" and "Stop frequency band" in "[8] Engineering information (reference only)"; d. added "8.2.11 Link loss", "8.4.9 Adhesion of dielectric", "8.4.10 Shrinkage for insulations", "8.4.11 Maximum pulling force of cable"; e. added different detail requirements or typical values in 8.2.4, 8.2.6 to 8.2.8, 8.3.1 to 8.3.4, 8.4.1, 8.4.3 to 8.4.8; f. deleted "7.4.4 Ovality of outer conductor". LIEC 61196-4-1:2022 s’applique aux cables de communication coaxiaux rayonnants. Ces cables sont concus pour etre utilises dans les systemes de communication sans fil des environnements longs, etroits, semi-fermes et interieurs, tels que les tunnels, les lignes ferroviaires, les autoroutes, les souterrains, les elevateurs et autres installations. Cette deuxieme edition annule et remplace la premiere edition parue en 2016. Cette edition inclut les modifications techniques majeures suivantes par rapport a l’edition precedente: a. reecriture de "1 Domaine d’application" pour assurer la coherence avec les autres specifications particulieres-cadres des cables coaxiaux; b. ajout d’exigences detaillees concernant la construction des conducteurs interieur et exterieur en "[7] Construction du cable"; c. ajout de "Plage de temperatures de stockage", "plage de temperatures d’installation" et "Bande de frequences d’arret" en "[8] Informations techniques (reference uniquement)"; d. ajout de "8.2.11 Perte de liaison", "8.4.9 Adherence du dielectrique", "8.4.10 Retraction des enveloppes isolantes", "8.4.11 Force de traction maximale du cable"; e. ajout de differentes exigences detaillees ou de valeurs types en 8.2.4, 8.2.6 a 8.2.8, 8.3.1 a 8.3.4, 8.4.1, 8.4.3 a 8.4.8; f. suppression de "7.4.4 Ovalite du conducteur exterieur".