IEC 61967-1-ed.2.0

Detail information

Designation: IEC 61967-1-ed.2.0

Publication date: 12/12/2018

Pages: 52

Country: International technical standard

Where to buy?

You can buy at www.mystandards.biz

Anotation

IEC 61967-1:2018 provides general information and definitions on the measurement of conducted and radiated electromagnetic disturbances from integrated circuits. It also provides a description of measurement conditions, test equipment and set-up as well as the test procedures and content of the test reports. Test method comparison tables are include in Annex A to assist in selecting the appropriate measurement method(s). The object of this document is to describe general conditions in order to establish a uniform testing environment and to obtain a quantitative measure of RF disturbances from integrated circuits (IC). Critical parameters that are expected to influence the test results are described. Deviations from this document are noted explicitly in the individual test report. The measurement results can be used for comparison or other purposes. Measurement of the voltage and current of conducted RF emissions or radiated RF disturbances, coming from an integrated circuit under controlled conditions, yields information about the potential for RF disturbances in an application of the integrated circuit. The applicable frequency range is described in each part of IEC 61967. This edition includes the following significant technical changes with respect to the previous edition: - the frequency range of 150 kHz to 1 GHz has been deleted from the title; - the frequency step above 1 GHz has been added to Table 1, Table 2 and to 5.4; - Table A.1 has been divided into two tables, and IEC 61967-8 has been added to Table A.2 of Annex A; - the general test board description has been moved to Annex D. LIEC 61967-1:2018 fournit des informations generales et des definitions sur la mesure des perturbations electromagnetiques conduites et rayonnees par les circuits integres. Elle decrit egalement les conditions de mesure, lappareillage et le montage dessai, ainsi que les procedures dessai et le contenu des rapports dessai. LAnnexe A fournit des tableaux de comparaison des methodes dessai permettant de choisir la ou les methodes de mesure appropriees. Le present document a pour objet de definir des conditions generales afin detablir un environnement dessai uniforme et dobtenir une mesure quantitative des perturbations RF par les circuits integres (CI). Il decrit les parametres fondamentaux supposes avoir une incidence sur les resultats des essais. Tout ecart par rapport au present document est consigne de maniere explicite dans les rapports dessai. Les resultats des mesures peuvent etre utilises notamment a des fins de comparaison. La mesure de la tension et du courant des emissions RF conduits ou des perturbations RF rayonnees provenant dun circuit integre dans des conditions controlees, fournit des informations sur les perturbations RF potentielles dans une application du circuit integre. La gamme de frequences applicable est decrite dans chaque partie de lIEC 61967. Cette edition inclut les modifications techniques majeures suivantes par rapport a ledition precedente: - la gamme de frequences 150 kHz a 1 GHz a ete supprimee du titre; - un palier de frequences au-dessus de 1 GHz a ete ajoute dans le Tableau 1, le Tableau 2 et au Paragraphe 5.4; - le Tableau A.1 a ete divise en deux tableaux et lIEC 61967-8 a ete ajoutee au Tableau A.2 de lAnnexe A; - la description generale de la carte dessai a ete deplacee a lAnnexe D.