Active standard | Published: 15/08/2018

IEC 62153-4-17-ed.1.0

Metallic cables and other passive components - Test methods - Part 4-17: Electromagnetic compatibility (EMC) - Reduction Factor
(Cables metalliques et autres composants passifs - Methodes d´essai - Partie 4-17: Compatibilite electromagnetique (CEM) - Facteur de reduction)

Available languages: English and French

Available design: electronic design (pdf), Print design, CD-ROM

from 59.20 USD show on eshop

Detail information

Designation: IEC 62153-4-17-ed.1.0

Publication date: 15/08/2018

Pages: 21

Country: International technical standard

Where to buy?

You can buy at www.mystandards.biz

Anotation

IEC 62153-4-17:2018 applies to the testing of the reduction factor of multi-element metallic cables used in analogue and digital communication and control. The described method is generally applicable to all screened metallic cables. The reduction factor describes the screening effectiveness of a cable screen at frequencies below 1 kHz with a ratio of voltages describing the screened and unscreened situation. During the measurement, the cable under test is connected to a specific current loop arrangement. LIEC 62153-4-17:2018 sapplique aux essais sur le facteur de reduction de cables metalliques a elements multiples utilises pour les communications et les commandes analogiques et numeriques. La methode decrite est generalement applicable a tous les cables metalliques ecrantes. Le facteur de reduction decrit lefficacite dun ecran de cable a des frequences inferieures a 1 kHz par un rapport de tensions decrivant la situation ecrantee et non ecrantee. Pendant la mesure, le cable en essai est raccorde a une boucle de courant specifique.

Popular Publishers

full catalog