IEC 62841-2-17-ed.1.0

Detail information

Designation: IEC 62841-2-17-ed.1.0

Publication date: 23/08/2017

Pages: 42

Country: International technical standard

Where to buy?

You can buy at www.mystandards.biz

Anotation

IEC 62841-2-17:2017 applies to routers intended for cutting slots into or shaping the edge of various materials. The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools are given in K.1 and L.1. This standard deals with the hazards presented by tools which are encountered by all persons in the normal use and reasonably foreseeable misuse of the tools. Hand-held electric tools, which can be mounted on a support or working stand for use as fixed tools without any alteration of the tool itself, are within the scope of this standard and such combination of a hand-held tool and a support is considered to be a transportable tool and thus covered by the relevant Part 3. This part of IEC 62841 does not apply to jointers. Routers that are primarily used for trimming the edge of materials are also known as trimmers. Routers that are used to cut various materials through the rotary action are also known as rotary cutters. This Part 2-17 is to be used in conjunction with the first edition of IEC 62841-1:2014. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 36 months from the date of publication. 62841-2-17:2017 sapplique aux defonceuses destinees a realiser un rainurage ou un moulurage des bords de differents materiaux. La tension assignee est inferieure a 3 700 W. Les limites dapplication de la presente Norme aux outils fonctionnant sur batterie sont indiquees en K.1 et L.1. La presente Norme traite des dangers presentes par les outils, encourus par tous les individus dans lutilisation normale et dans lutilisation impropre raisonnablement previsible de ces outils. Les outils electroportatifs, qui peuvent etre montes sur un support de travail pour etre utilises comme outils installes a poste fixe sans aucune modification de loutil lui-meme, sont compris dans le domaine dapplication de la presente Norme et la combinaison dun outil portatif et dun support est consideree comme un outil portable, donc couvert par la Partie 3 applicable. La presente partie de lIEC 62841 ne sapplique pas aux mortaiseuses. Les defonceuses utilisees principalement pour laffleurage des bords des materiaux sont egalement appelees affleureuses. Les defonceuses utilisees pour couper differents materiaux par rotation sont egalement appelees fraises rotatives. La presente partie 2-17 doit etre utilisee conjointement avec la premiere edition de lIEC 62841-1 (2014). Lattention des Comites Nationaux est attiree sur le fait que les fabricants dappareils et les organismes dessai peuvent avoir besoin dune periode transitoire apres la publication dune nouvelle publication IEC, ou dune publication amendee ou revisee, pour fabriquer des produits conformes aux nouvelles exigences et pour adapter leurs equipements aux nouveaux essais ou aux essais revises. Le comite recommande que le contenu de cette publication soit enterine au niveau national au plus tot 36 mois apres la date de publication. Mots cles: defonceuse, affleureuse, outil portable, securite