IEC 62841-3-16-ed.1.0

Detail information

Designation: IEC 62841-3-16-ed.1.0

Publication date: 04/11/2025

Pages: 38

Country: International technical standard

Where to buy?

You can buy at www.mystandards.biz

Anotation

IEC 62841-3-16:2025 applies to transportable belt sanders, disc sanders and belt/disc sanders which are equipped with – a sanding belt; or – a sanding disc; or – a sanding belt and a sanding disc for sanding solid materials. This document does not apply to hand-held disc-type sanders. NOTE 101 Hand-held disc-type sanders are covered by IEC 62841-2-3. This document does not apply to hand-held belt sanders. NOTE 102 Hand-held belt sanders are covered by IEC 62841-2-4. This Part 3-16 is to be used in conjunction with the first edition of IEC 62841-1:2014 and IEC 62841-1:2014/AMD1:2025. This Part 3-16 supplements or modifies the corresponding clauses in IEC 62841-1:2014, so as to convert it into the IEC Standard: Particular requirements for transportable belt sanders, disc sanders and belt/disc sanders. Where a particular subclause of IEC 62841-1:2014 is not mentioned in this Part 3-16, that subclause applies as far as relevant. Where this document states "addition", "modification" or "replacement", the relevant text in IEC 62841-1:2014 is to be adapted accordingly. NOTE The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations can need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 36 months from the date of publication. LIEC 62841-3-16:2025 sapplique aux ponceuses a bande, ponceuses a disque et ponceuses a bande/disque portables equipees – dune bande abrasive; ou – dun disque abrasif; ou – dune bande abrasive et dun disque abrasif pour des materiaux abrasifs solides. Le present document ne sapplique pas aux ponceuses portatives du type a disque. NOTE 101 Les ponceuses portatives du type a disque sont couvertes par lIEC 62841-2-3. Le present document ne sapplique pas aux ponceuses portatives du type a bande. NOTE 102 Les ponceuses portatives du type a bande sont couvertes par lIEC 62841-2-4. La presente Partie 3-16 doit etre utilisee conjointement avec la premiere edition de lIEC 62841-1:2014 et lIEC 62841-1:2014/AMD1:2025. La presente Partie 3-16 complete ou modifie les articles correspondants de lIEC 62841-1:2014, de facon a la transformer en norme IEC: Exigences particulieres pour les ponceuses a bande, les ponceuses a disque et les ponceuses a bande/disque portables. Lorsquun paragraphe particulier de lIEC 62841-1:2014 nest pas mentionne dans la presente Partie 3-16, ce paragraphe sapplique pour autant quil soit pertinent. Lorsque le present document mentionne "addition", "modification" ou "remplacement", le texte correspondant de lIEC 62841-1:2014 doit etre adapte en consequence. NOTE Lattention des Comites nationaux est attiree sur le fait que les fabricants dappareils et les organismes dessai peuvent avoir besoin dune periode transitoire apres la publication dune nouvelle publication IEC, ou dune publication amendee ou revisee, pour fabriquer des produits conformes aux nouvelles exigences et pour adapter leurs equipements aux nouveaux essais ou aux essais revises. Le comite recommande que le contenu de cette publication soit adopte pour application nationale au plus tot 36 mois apres la date de publication.