Cookies
Potřebujeme Váš souhlas k využití jednotlivých dat, aby se Vám mimo jiné mohli ukazovat informace týkající se Vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Active standard | Published: 01/08/2017
IEEE C93.3-2017
IEEE Standard Requirements for Power-Line Carrier Line Traps (30 kHz to 500 kHz)
Available languages: English
Available design: electronic (protected pdf) - Immediate download, Print design
from 71.00 USD
show on eshop
Detail information
Designation: IEEE C93.3-2017
Publication date: 01/08/2017
Pages: 46
Country: International technical standard
Where to buy?
You can buy at www.mystandards.bizAnotation
New IEEE Standard - Active.Line traps inserted into a power line to provide a high impedance at power-line-carrier frequencies (30 kHz to 500 kHz) are covered in this standard. The purpose is to isolate the carrier signal from system impedance changes due to faults or switching behind the point of insertion, and to guide the signal in the proper direction. The standard covers line traps in which the main coil is designed as a single-phase, air-cooled inductor of the dry type.
ISBN: 978-1-5044-3971-8, 978-1-5044-3972-5
Number of Pages: 46
Product Code: STD22546, STDPD22546
Keywords: IEEE C93.3™, line trap, PLC, power line carrier, wave trap
Category: Power Systems Communication
Popular Publishers
DIN standards
BS standards
ASTM standards
ISO standards
IEC standards
Copyright © All rights reserved | This template is made with by Colorlib
