Active standard | Published: 17/06/2016

ISO/TS 17951-1:2016

Water quality — Determination of fluoride using flow analysis (FIA and CFA) — Part 1: Method using flow injection analysis (FIA) and spectrometric detection after off-line distillation
(Qualité de l´eau — Dosage des fluorures par analyse en flux (FIA et CFA) — Partie 1: Méthode par analyse avec injection en flux (FIA) et détection spectrométrique)

Available languages: English

Available design: electronic design (pdf), Print design

from 2 087.70 CZK show on eshop

Detail information

Designation: ISO/TS 17951-1:2016

Publication date: 17/06/2016

Pages: 12

Country: International technical standard

Where to buy?

You can buy at www.mystandards.biz

Anotation

Description / Abstract: ISO/TS 17951-1:2016 specifies a method for the determination of fluoride in waters, waste waters and effluents by flow injection analysis (FIA). Any insoluble or complexed fluoride is converted to fluoride ion by a manual distillation procedure from sulfuric/phosphoric acid. Fluoride ion in the distillate is measured using flow analysis with lanthanum alizarin complexone and spectrometric detection. This method is applicable to industrial waste waters, effluents, surface waters, ground waters, leachates. It is not recommended for drinking waters where a distillation step is not required. In ISO/TS 17951-1:2016, two working ranges are described: - working range I: 0,1 mg/l to 1 mg/l; - working range II: 1 mg/l to 10 mg/l. The specification of the calibration solutions are to be adapted accordingly.

Popular Publishers

full catalog