Active standard | Published: 27/03/2026

ISO 13726:2026-ed.3.0

Hydraulic fluid power — Single rod cylinders, 16 MPa (160 bar) compact series with bores from 250 mm to 500 mm — Accessory mounting dimensions
(Transmissions hydrauliques — Vérins a simple tige, série compacte 16 MPa (160 bar) d´alésages 250 mm a 500 mm — Dimensions d´interchangeabilité des accessoires)

Available languages: English

Available design: electronic design (pdf), Print design

from 87.50 EUR show on eshop

Detail information

Designation: ISO 13726:2026-ed.3.0

Publication date: 27/03/2026

Pages: 8

Country: International technical standard

Where to buy?

You can buy at www.mystandards.biz

Anotation

Description / Abstract: This document specifies the mounting dimensions of the accessories regarding interchangeability for 16 MPa (160 bar) compact cylinders conforming to ISO 6020-3. The accessories are applied to mounting with cylinders manufactured in accordance with ISO 6020-3. This document covers the following accessories of which the identification code is specified in ISO 6099: AP2 rod clevis, internal thread (see Figure 1 and Table 1); AP4 rod eye, plain, internal thread (see Figure 2 and Table 2); AA4 - L pivot pin (locking plate) (see Figure 3 and Table 3); AL6 locking plate for pivot pin (see Figure 4 and Table 4); AA4 - S and AA4 - R pivot pin plain (see Figure 5-6 and Table 5 respectively). The design of these accessories is based on the maximum forces derived from pressures and bore diameters of the cylinders specified in ISO 2944 and ISO 3320.

Popular Publishers

full catalog