ISO 14567:1999

Detail information

Designation: ISO 14567:1999

Publication date: 11/03/1999

Pages: 27

Country: International technical standard

Where to buy?

You can buy at www.mystandards.biz

Anotation

Description / Abstract: This International Standard specifies requirements, test methods, and marking, labelling and packaging, as appropriate,of both permanent and temporary single-point anchor devices exclusively for the attachment of personalprotective equipment (PPE) for protection against falls from a height for fall arrest, work positioning and travelrestriction (work restraint).It is applicable only to anchor devices for PPEs that conform to ISO 10333-1, ISO 10333-2, ISO 10333-3 andISO 10333-5.NOTE 1 Further standards are in preparation for other types of PPE: ISO 10333-6 and ISO 14566 (see bibliography).Anchor devices are rated to sustain a maximum (dynamic) arresting force of 6,0 kN, and a maximum (static) loading of1,0 kN (assuming a person of 100 kg mass) in post-fall arrest suspension, work-positioning mode, or restraint mode.Anchor devices are intended for single person use only. A rescuer should not attach to the same anchor device as aperson being rescued, unless the anchor device has been specifically designed for such purposes, and the instructionsfor use specifically permit this application.NOTE 2 Vertical rigid or flexible line systems and horizontal lifelines are not within the scope of this International Standard,but are covered in ISO 10333-4 and ISO 16024.