Active standard | Published: 14/05/2019

ISO 5628:2019-ed.3.0

Paper and board — Determination of bending stiffness — General principles for two-point, three-point and four-point methods
(Papier et carton — Détermination de la rigidité a la flexion — Principes généraux pour les méthodes a deux points, a trois points et a quatre points)

Available languages: English

Available design: electronic design (pdf), Print design

from 100.00 USD show on eshop

Detail information

Designation: ISO 5628:2019-ed.3.0

Publication date: 14/05/2019

Pages: 10

Country: International technical standard

Where to buy?

You can buy at www.mystandards.biz

Anotation

Description / Abstract: This document specifies three test methods for determining the bending stiffness of paper and paperboard. The test methods differ in the type of loading mode, thus giving rise to the two-point, three-point and four-point bending test methods. For paper and paperboard in a low thickness range, the two-point bending method and the three-point bending method are suitable. For corrugated fibreboard and board with a higher thickness, the four-point bending method is recommended. The measurement conditions are defined in such a way that the test piece is not subjected to any significant permanent deformation during the test, nor is the range of validity of the formulae for calculating the bending stiffness exceeded. In these bending tests, the test pieces of paper and board are regarded as "beams" as defined by the science of the strength of materials, see Reference [2].

Popular Publishers

full catalog