Active standard | Published: 17/04/2019

ISO 6721-6:2019-ed.2.0

Plastics — Determination of dynamic mechanical properties — Part 6: Shear vibration — Non-resonance method
(Plastiques — Détermination des propriétés mécaniques dynamiques — Partie 6: Vibration en cisaillement — Méthode hors résonance)

Available languages: English

Available design: electronic design (pdf), Print design

from 99.40 USD show on eshop

Detail information

Designation: ISO 6721-6:2019-ed.2.0

Publication date: 17/04/2019

Pages: 10

Country: International technical standard

Where to buy?

You can buy at www.mystandards.biz

Anotation

Description / Abstract: This document describes a forced, non-resonance method for determining the components of the shear complex modulus G* of polymers at frequencies typically in the range 0,01 Hz to 100 Hz. Higher-frequency measurements can be made, but significant errors in the dynamic properties measured are likely to result (see 10.2.2 and 10.2.3). The method is suitable for measuring dynamic storage moduli in the range 0,1 MPa to 50 MPa. NOTE Although materials with moduli greater than 50 MPa can be studied, more accurate measurements of their dynamic shear properties can be made using a torsional mode of deformation (see ISO 6721-2 and ISO 6721-7). This method is particularly suited to the measurement of loss factors greater than 0,02 and can therefore be conveniently used to study the variation of dynamic properties with temperature and frequency through most of the glass-rubber relaxation region (see ISO 6721-1). The availability of data determined over wide ranges of both frequency and temperature enables master plots to be derived, using frequency/temperature shift procedures, which display dynamic properties over an extended frequency range at different temperatures.

Popular Publishers

full catalog