SAE ARP5283B

Detail information

Designation: SAE ARP5283B

Publication date: 01/09/2022

Pages: 0

Country: American technical standard

Where to buy?

You can buy at www.mystandards.biz

Anotation

The purpose of this specification is to provide airplane operators and tow vehicle manufacturers with:a
General design and operating requirements pertinent to test and evaluation of towbarless tow vehicles. Specific design requirements are provided in ARP4852 and ARP4853.

b
Test and evaluation requirements. The results of these test evaluations will determine if the loads induced by the tow vehicle will exceed the design loads of the nose gear, or are within the aircraft manufacturer’s limits so that they do not affect the certified safe limit of the nose gear. The results of these test evaluations will also determine if a stability problem may occur during pushback and/or maintenance towing operations with the tested airplane/tow vehicle combination.


This document specifies general test requirements and a test evaluation procedure for towbarless tow vehicles (TLTV) intended for pushback and maintenance towing only. It is not meant for dispatch (operational) towing (see definitions in 2.3). Dispatch towing imposes more fatigue cycles on nose gears and structure due to additional passenger, cargo, and fuel loads, as well as more starts, stops and turns. Airframe manufacturers may require submittal of test results for evaluation or may provide information which allows TLTV manufacturers or airlines to self-test or evaluate the towbarless tow vehicles themselves. Refer to the airframe manufacturer’s documentation for evaluation requirements and detailed testing procedures that may be different than contained in this specification. In the event of a difference in requirements, airframe manufacturer documentation takes precedence over this Recommended Practice.

TLTV manufacturers may elect to prepare and provide customers or regulatory agencies with a “Certificate of Compliance” or equivalent documentation as evidence that successful testing and evaluation of a specific tow vehicle/airplane type combination has been completed in accordance with this ARP and/or the applicable detailed airframe manufacturer’s documentation. This certification will allow usage of the vehicle on specifically designated airplane model types. The certificate should be established under an appropriate quality control program meeting the requirements of ISO 9000 Series or equivalent.

This specification requires that the TLTVs under consideration be maintained and operated in a serviceable condition. In addition, the vehicle to airplane interface protection system shall be calibrated periodically. This information is defined in ARP5284 and ARP5285.

SUBJECT TAXONOMY: Landing gear, Aircraft operations, Ground support, Fleet management, Maintenance, repair, and service operations, Test procedures
SUBFILE: Aerospace
TYPE OF DOCUMENT: Aerospace Standard