Active standard | Published: 01/01/2021

SAE J1907

Peel Adhesion Test for Glass to Elastomeric Material for Automotive Glass Encapsulation

Available languages: English

Available design: electronic design (pdf), Print design

from 78.20 USD show on eshop

Detail information

Designation: SAE J1907

Publication date: 01/01/2021

Pages: 0

Country: American technical standard

Where to buy?

You can buy at www.mystandards.biz

Anotation

This recommended practice defines a procedure for the construction and testing of a 180 deg peel specimen for the purpose of determining the bondability of glass to elastomeric material in automotive modular glass. This test method suggests that elastomeric material of less than 172 mpa modulus be used as the encapsulating material. The present practice of encapsulating automotive glass is described as molded-in-place elastomeric material onto the outer edge of the glass using thermoplastic or thermosetting material that quickly sets in the mold. The glass is removed from the mold with the cured elastomeric material bonded to the perimeter of the glass. This encapsulated glass module can now be bonded with a sealant adhesive into the body opening of a vehicle.

SUBFILE: Automotive
TYPE OF DOCUMENT: Ground Vehicle Standard

Stabilized: Jan 2021 SAE - Standards Status Definitions