Active standard | Published: 01/09/2015

SAE J2050

High-Temperature Power Steering Pressure Hose

Available languages: English

Available design: electronic design (pdf), Print design

from 1 643.50 CZK show on eshop

Detail information

Designation: SAE J2050

Publication date: 01/09/2015

Pages: 0

Country: American technical standard

Where to buy?

You can buy at www.mystandards.biz

Anotation

This SAE Standard covers two types of hose fabricated from textile reinforcement and synthetic rubber, assembled with end fittings for use in high-temperature automotive power steering applications as flexible connections within the temperature range of ?40 to +150 °C (?40 to +302 °F) maximum and 10.3 MPa (1500 psi) maximum working pressure. These hoses are intended for use in applications where reduction in amplitude of pump pressure pulsation is required. Class A hose has a nominal OD of 19.84 mm (0.781 in). Class B hose is a lightweight hose with a nominal OD of 17.91 mm (0.705 in). This specification defines the minimum performance levels of a flexible connector in the hydraulic steering system to convey power steering fluid from the steering pump to the steering gear.

SUBJECT TAXONOMY: Power steering, Textiles, Hoses
SUBFILE: Automotive
TYPE OF DOCUMENT: Ground Vehicle Standard

Stabilized: Sep 2015 SAE - Standards Status Definitions