BS - Britské národní normy

Specification for nickel-iron-chromium-molybdenum-aluminium-titanium heat-resisting alloy billets, bars, forgings and parts (Ni/Co 43.5, Cr 16.5, Mo 3.3, Al 1.2, Ti 1.2, Fe remainder).

Dostupné jazyky: Anglicky

Dostupné prevedenie: PDF - okamžité stiahnutie, Tlačené

Specification for nickel-chromium- iron-molybdenum-cobalt-tungsten heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 21.7, Fe 18.5, Mo 9, Co 1.5, W 0.6).

Dostupné jazyky: Anglicky

Dostupné prevedenie: PDF - okamžité stiahnutie, Tlačené

Specification for high expansion heat-resisting steel bar and wire for the manufacture of bolts, studs, set screws and nuts (Ni 25.5, Cr 15, Ti 2, Mn 1.5, Mo 1.25, Si 0.7, V 0.3) (limiting ruling section 50 mm).

Dostupné jazyky: Anglicky

Dostupné prevedenie: PDF - okamžité stiahnutie, Tlačené

Specification for ingots and castings of magnesium-cerium-zinc-zirconium alloy (precipitation treated) (rare earth metals 3.0, Zn 2.3, Zr 0.6).

Dostupné jazyky: Anglicky

Dostupné prevedenie: PDF - okamžité stiahnutie, Tlačené

Specification for ingots and castings of magnesium-zinc-cerium-zirconium alloy (precipitation treated) (Zn 4.5, rare earth metals 1.2, Zr 0.7).

Dostupné jazyky: Anglicky

Dostupné prevedenie: PDF - okamžité stiahnutie, Tlačené

Ingots (as cast) and castings (solution treated and artificially aged) of aluminium-silicon-magnesium alloy (Si 7, Mg 0.6).

Dostupné jazyky: Anglicky

Dostupné prevedenie: PDF - okamžité stiahnutie, Tlačené

Specification for forging stock and forgings of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8).

Dostupné jazyky: Anglicky

Dostupné prevedenie: PDF - okamžité stiahnutie, Tlačené

Specification for plate of aluminium-copper-magnesium-silicon-manganese alloy (solution treated, controlled stretched and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8).

Dostupné jazyky: Anglicky

Dostupné prevedenie: PDF - okamžité stiahnutie, Tlačené

Specification for plate of aluminium-zinc-magnesium-copper-chromium alloy (solution treated, controlled stretched and precipitation treated) (Zn 5.8, Mg 2.5, Cu 1.6, Cr 0.15).

Dostupné jazyky: Anglicky

Dostupné prevedenie: PDF - okamžité stiahnutie, Tlačené

Specification for ingots and castings of aluminium-silicon-magnesium alloy (solution treated and precipitation treated) (Si 7, Mg 0.3).

Dostupné jazyky: Anglicky

Dostupné prevedenie: PDF - okamžité stiahnutie, Tlačené