ČSN - České národní normy

Aerospace series - Heat resisting alloy NI-PH2601 - Solution treated and cold worked - Bar for forged fasteners - D <= 50 mm - 1 550 MPa <= Rm <= 1 830 MPa

Dostupné jazyky: Anglicky

Dostupné prevedenie: Tlačené

Aerospace series - Heat resisting nickel base alloy (NIP101HT) - Cold worked and solution treated - Bars for machining for fasteners - 3 mm <= D <= 50 mm

Dostupné jazyky: Anglicky

Dostupné prevedenie: Tlačené

Aerospace series - Heat-resisting alloy X6NiCrTiMoV26-15 (1.4980) - Softened and cold worked - Wires for forged fasteners - D <= 15 mm - 900 MPa <= Rm <= 1 100 MPa

Dostupné jazyky: Anglicky

Dostupné prevedenie: Tlačené

Aerospace series - Heat resisting alloy X6NiCrTiMoV26-15 (1.4980) - Softened and cold worked - Wires for forged fasteners - D <= 15 mm - 900 MPa <= Rm <= 1 100 MPa

Dostupné prevedenie: Tlačené

Aerospace series - Steel X12CrNiMoV12-3 (1.4938) - Air melted and consumable electrode remelted - Hardened and tempered - Bars - De <= 150 mm - 900 MPa <= Rm <= 1 100 MPa

Dostupné jazyky: Anglicky

Dostupné prevedenie: Tlačené

Aerospace series - Heat resisting alloy CO-PH4101 (CoCr20W15N1) -Vacuum melted - Solution treated - Forgings - De <= 100 mm

Dostupné jazyky: Anglicky

Dostupné prevedenie: Tlačené

Aerospace series - Steel X4CrNiMo16-5-1 - Air melted - Hardened and tempered - Sheets and plates - 0,3 mm <= a <= 50 mm - 900 MPa <= Rm <= 1 050 MPa

Dostupné jazyky: Anglicky

Dostupné prevedenie: Tlačené

Letectví a kosmonautika - Ocel X4CrNiMo16-5-1 - Tavená na vzduchu - Kalená a popouštěná - Plechy - 0,3 mm <= a <= 6 mm - 900 MPa <= Rm <= 1050 MPa (Norma k přímému použití jako ČSN).

Dostupné jazyky: Anglicky

Dostupné prevedenie: Tlačené

Aerospace series - Heat-resisting alloy NI-PH1301 (NiCr19Co18Mo4Ti3Al3) - Solution treated and precipitation treated - Bars and sections - De <= 200 mm

Dostupné jazyky: Anglicky

Dostupné prevedenie: Tlačené

Aerospace series - Steel X3CrNiMoAl (1.4534) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bars for machining - a or D <= 200 mm - 1 200 MPa <= Rm <= 1 350 MPa

Dostupné jazyky: Anglicky

Dostupné prevedenie: Tlačené