ČSN - České národní normy - Stránka 600

ČSN EN 12373-4 (01.04.2000) Neplatné

Aluminium and aluminium alloys - Anodizing - Part 4: Estimation of loss of absorptive power of anodic oxidation coatings after sealing by dye spot test with prior acid treatment

Dostupné prevedenie: Tlačené

od 13.90 EUR viac informácií

ČSN EN 12373-5 (01.02.2000) Neplatné

Aluminium and aluminium alloys - Anodizing - Part 5: Assessment of quality of sealed anodic oxidation coatings by measurement of admittance

Dostupné prevedenie: Tlačené

od 4.90 EUR viac informácií

ČSN EN 12373-6 (01.02.2000) Neplatné

Aluminium and aluminium alloys - Anodozing - Part 6: Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution without prior acid treatment

Dostupné prevedenie: Tlačené

od 4.90 EUR viac informácií

ČSN EN 12373-7 (01.01.2003) Neplatné

Aluminium and aluminium alloys - Anodizing - Part 7: Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution with prior acid treatment

Dostupné prevedenie: Tlačené

od 7.60 EUR viac informácií

ČSN EN 12373-7 (01.02.2000) Neplatné

Aluminium and aluminium alloys - Anodizing - Part 7: Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution with prior acid treatment

Dostupné prevedenie: Tlačené

od 7.60 EUR viac informácií

ČSN EN 12373-8 (01.02.2000) Neplatné

Aluminium and aluminium alloys - Anodizing - Part 8: Determination of the comparative fastness to ultra-violet light and heat of coloured anodic oxidation coatings

Dostupné prevedenie: Tlačené

od 4.90 EUR viac informácií

ČSN EN 12373-9 (01.02.2000) Neplatné

Aluminium and aluminium alloys - Anodizing - Part 9: Measurement of wear resistance and wear index of anodic oxidation coatings using an abrasive wheel wear test apparatus

Dostupné prevedenie: Tlačené

od 9.20 EUR viac informácií

ČSN EN 12373-10 (01.02.2000) Neplatné

Aluminium and aluminium alloys - Anodizing - Part 10: Measurement of mean specific abrasion resistance of anodic oxidation coatings using an abrasive jet test apparatus

Dostupné prevedenie: Tlačené

od 9.20 EUR viac informácií

ČSN EN 12373-11 (01.06.2001) Neplatné

Aluminium and aluminium alloys - Anodizing - Part 11: Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20°, 45°, 60° or 85°

Dostupné prevedenie: Tlačené

od 9.20 EUR viac informácií

ČSN EN 12373-12 (01.06.2001) Neplatné

Aluminium and aluminium alloys - Anodizing - Part 12: Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments

Dostupné prevedenie: Tlačené

od 7.60 EUR viac informácií