Cookies
Potřebujeme Váš souhlas k využití jednotlivých dat, aby se Vám mimo jiné mohli ukazovat informace týkající se Vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
STN - Slovenské národní normy
Stránka 2433
STN EN 60249-2-15 (01.06.2001) Neplatné
Base materials for printed circuits. Part 2: Specifications. Specification No. 15: Flexible copper-clad polyimid film, of defined flammability
Dostupné prevedenie: Tlačené
STN EN 60249-2-16 (01.06.2001) Neplatné
Base materials for printed circuits. Part 2: Specifications. Specification No. 16: Polyimide woven glass fabric copper-clad laminated sheet of defined flammability (vertical burning test)
Dostupné prevedenie: Tlačené
STN EN 60249-2-17 (01.06.2001) Neplatné
Base materials for printed circuits. Part 2: Specifications. Specification No. 17: Thin polyimide woven glass fabric copper-clad laminated sheet of defined flammability for use in the fabrication of multilayer printed boards
Dostupné prevedenie: Tlačené
STN EN 60249-2-18 (01.06.2001) Neplatné
Base materials for printed circuits. Part 2: Specifications. Specification No. 18: Bismaleimide/triazine modified epoxide woven glass fabric copper-clad laminated sheet of defined flammability (vertical burning test)
Dostupné prevedenie: Tlačené
STN EN 60249-2-19 (01.06.2001) Neplatné
Base materials for printed circuits. Part 2: Specifications. Specification No. 19: Thin bismaleimide/triazine modified epoxide woven glass fabric copper-clad laminated sheet of defined flammability for use in the fabrication of multilayer printed boards
Dostupné prevedenie: Tlačené
STN EN 61086-1 (01.10.2004)
Coatings for loaded printed wire boards (conformal coatings) Part 1: Definitions, classification and general requirements
Dostupné jazyky: Anglicky
Dostupné prevedenie: Tlačené
STN EN 61086-2 (01.10.2004)
Coatings for loaded printed wire boards (conformal coatings) Part 2: Methods of test
Dostupné jazyky: Anglicky
Dostupné prevedenie: Tlačené
STN EN 61086-3-1 (01.10.2004)
Coatings for loaded printed wire boards (conformal coatings) Part 3-1: Specifications for individual materials - Coatings for general purpose (Class 1), high reliability (Class 2) and aerospace (Class 3)
Dostupné jazyky: Anglicky
Dostupné prevedenie: Tlačené
STN EN 61188-5-2 (01.04.2004)
Printed boards and printed board assemblies - Design and use Part 5-2: Attachment (land/joint) considerations - Discrete components
Dostupné jazyky: Anglicky
Dostupné prevedenie: Tlačené
STN EN 61188-5-3 (01.08.2008)
Printed boards and printed board assemblies - Design and use - Part 5-3: Attachment (land/joint) considerations - Components with gull-wing leads on two sides
Dostupné jazyky: Anglicky
Dostupné prevedenie: Tlačené
Copyright © All rights reserved | This template is made with by Colorlib
