ASTM C660-24

Podrobné informácie

Označenie: ASTM C660-24

Dátum vydania: 01.11.2024

Stránok: 3

Krajina: Americká technická norma

Kde kúpiť?

Môžete zakúpiť na eshop.normservis.sk

Anotácia

These practices are intended for production and preparation of gray iron castings for porcelain enamelling. Design of the casting should be such as to minimize variations in temperature during firing and cooling. The governing factors in pattern layout and shop control are elimination of discontinuities, chill, and inclusions at or near the surfaces to be coated. Visual inspection methods for enamelling surfaces should place emphasis on the detection and remedy of porosity, sand inclusions, and gas holes. Porosity consisting of essentially subsurface pinholes, shallow covered blows, body scars, or shrinkage near the surface may or may not be acceptable for correction, depending upon severity.


Keywords:
carbon, castings, cleaning, contaminants, gray iron, metal composition, porcelain enamel,, ICS Number Code 77.140.80 (Iron and steel castings)