IEC 61968-3-ed.3.0

Podrobné informácie

Označenie: IEC 61968-3-ed.3.0

Dátum vydania: 27.04.2021

Stránok: 756

Krajina: Medzinárodná technická norma

Kde kúpiť?

Môžete zakúpiť na eshop.normservis.sk

Anotácia

IEC 61968-3:2021 provides utilities with the means to supervise main substation topology (breaker and switch state), feeder topology and control equipment status through SCADA, AMI and other data sources. It also provides the means for handling network connectivity and loading conditions. Finally, it makes it possible for utilities to locate customer telephone complaints and coordinate activities of field crews with respect to planned and unplanned outages. IEC 61968-3 specifies the information content of a set of message payloads that can be used to support many of the business functions related to network operations. Typical uses of the message payloads defined in IEC 61968-3 include data acquisition by external systems, fault isolation, fault restoration, trouble management and coordination of the real-time state of the network. The scope illustrates the possibility of implementing IEC 61968-3 functionality as either a single integrated advanced distribution management system or as a set of separate functions – OMS, DMS and SCADA. Utilities may choose to buy these systems from different vendors and integrate them using the IEC 61968-3 messages. Alternatively, a single vendor could provide two or all of these components as a single integrated system. In the case of more than one system being provided by the same vendor, the vendor may choose to use either extensions of the IEC 61968 messages or a proprietary integration mechanism to provide enhanced functionality over and above what is required/supported by the IEC 61968-3 specification. While this is a possible implementation, Subclause 4.3 defines the scope in terms of business functions that are implemented in common vendor offerings. Annexes in this document detail integration scenarios or use cases, which are informative examples showing typical ways of using the message payloads defined in this document as well as message payloads to be defined in other parts of the IEC 61968 series This third edition cancels and replaces the second edition published in 2017. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) major rework of Switch Order related profiles and Outage related profiles; b) documented profiles in more detail as a result of the analysis of end-to-end use cases; c) separated Measurement and Control profile into two profiles: PSRMeasurements and PSRControls; d) replaced Temporary Network Change profile with SwitchingEvents profile; e) added MeasurementAction, ControlAction, GenericAction and VerificationAction to SwitchingPlans profile. Added examples; f) added SwitchingActions profile to support the coordination of SwitchingPlan execution between control room and the field crew; g) added ClampAction to SwitchingPlan, SwitchingAction and SwitchingEvent profiles, to allow clamps to be placed and removed independently of jumpers; h) separated OutagesAndFaults profile into UnplannedOutages, PlannedOutages, EquipmentFaults, LineFaults; i) added list of energized and de-energized UsagePoints to the UnplannedOutages profile; j) added PlannedOutages profile; k) added PlannedOutageNotifications profile; l) added SwitchingPlanRequest profile to replace OutageSchedules profile; m) expanded TroubleOrders profile to include UnplannedOutages and TroubleTickets and to allow crews to be scheduled to individual tasks within the TroubleOrder; n) expanded use cases and sequence diagrams; o) sequence diagrams updated to use IEC 61968-100 message patterns; p) use cases in IEC 62559-2 use case template; q) added example XML for profiles; r) replaced xsd in Annex with tables to document the profiles in a serialisation-independent form; s) clarified FLISR use case to include interactions between DSO and TSO per review comments from Edition 2. t) removed OperationalTags since it is now part of the TagAction in the SwitchingEvents payload IEC 61968-3:2021 donne aux entreprises de distribution les moyens de surveiller la topologie de poste principale (etat du disjoncteur et de lorgane de coupure), la topologie de lignes dalimentation et le statut de lequipement de commande avec SCADA, AMI et dautres sources de donnees. Elle fournit egalement les moyens pour gerer l’etat de charge et de connectivite du reseau. Enfin, elle rend possibles la localisation des plaintes telephoniques des clients et la coordination des activites des equipes sur le terrain en ce qui concerne les interruptions planifiees et non planifiees. LIEC 61968-3 specifie le contenu dinformations dun ensemble de charges utiles de messages qui peuvent etre utilisees pour prendre en charge la plupart des fonctions metier liees a lexploitation du reseau. Les utilisations classiques des charges utiles de messages definies dans lIEC 61968-3 incluent lacquisition de donnees par des systemes externes, lisolement du defaut, le traitement des defauts, la gestion des dysfonctionnements et la coordination de letat en temps reel du reseau. La domaine dapplication permet la possibilite de mise en ouvre de la fonctionnalite de lIEC 61968-3 soit comme un seul systeme de gestion de la distribution avance integre, soit comme un ensemble de fonctions distinctes (OMS, DMS et SCADA). Les entreprises de distribution peuvent choisir dacheter ces systemes aupres de differents fournisseurs et de les integrer a laide des messages de lIEC 61968-3. Dautre part, un seul fournisseur peut fournir au moins deux de ces composants dans un seul systeme integre. Si plusieurs systemes sont fournis par le meme fournisseur, ce dernier peut choisir dutiliser soit des extensions des messages de lIEC 61968-3 soit un mecanisme dintegration proprietaire pour ameliorer la fonctionnalite par rapport a ce que la specification de l’IEC 61968-3 exige/prend en charge. Bien quil sagisse dune mise en ouvre possible, le paragraphe 4.3 definit le domaine dapplication en ce qui concerne les fonctions metier qu