CISPR 12-ed.7.0

Podrobné informace

Označení: CISPR 12-ed.7.0

Datum vydání: 18.07.2025

Stran: 102

Země: Mezinárodní technická norma

Kde koupit?

Můžete zakoupit na eshop.normservis.cz

Anotace

CISPR 12:2025 The limits in this document are designed to provide protection in the frequency range of 30 MHz to 1 000 MHz for off-board receivers. Compliance with this document does not guarantee adequate protection for receivers nearer than 10 m to the vehicle, boat or device. This document applies to the emission of electromagnetic energy that can cause interference to radio reception and which is emitted from: 1) vehicles propelled by an internal combustion engine (ICE), electrical means or both (see 3.1.34); 2) boats propelled by an ICE, electrical means or both (see 3.1.4). Boats are tested in the same manner as vehicles except where they have unique characteristics as explicitly stated in this document; 3) devices equipped with ICE (see 3.1.9). In the case of hybrid devices (e.g. equipped with both ICE and traction batteries), only the ICE mode is included in this document; 4) inboard and outboard boat engines and motors [i.e. equipped with ICE, electric motor (EM), or both], when marketed independently. See Annex D for a flow chart and a list of examples to help determine the applicability of CISPR 12. This document does not apply to aircraft, household appliances, medical devices, traction systems (railway engine or locomotive, streetcar or tram and electric trolley bus), vehicle, boat and device off-board chargers or to incomplete vehicles, boats and devices. In the case of a dual-mode trolley bus (e.g. propelled by power from either AC/DC mains or an ICE), the ICE propulsion system is included, but the EM propulsion portion of the vehicle is excluded from this document. In addition, domestic helper robots, such as household cleaning robots, hotel service robots and personal safety robots are also excluded from the scope of this document. NOTE 1 Other than inboard or outboard boat engines and motors that are marketed independently, this document does not apply to components or incomplete products, such as an ICE, an incomplete vehicle or boat that has not yet been fitted with an ICE or EM, or spare parts. This document only applies to the final product, which is equipped with all applicable parts and components to be able to function as intended. NOTE 2 Appliances without ICE for typical housekeeping and service functions in the household and similar environment are covered by the requirements of CISPR 14-1[1]. NOTE 3 Protection of receivers used on board the same vehicle as the disturbance source(s) are covered by CISPR 25[2]. This document does not prescribe measurement methods or limits for conducted disturbances, for the charging mode of operation, where the (electric or hybrid) vehicle or boat is connected to power mains, either directly (i.e. plug-in vehicle or boat) or indirectly (i.e. wireless power charging). The user is referred to appropriate IEC and CISPR standards, which define measurement techniques and limits for this condition. NOTE 4 See IEC 61851-21-1[3] for road vehicles and IEC 61000-6-3[4], IEC 61000-6-4[5] and IEC 61000-6-8[6] for other types of vehicles or boats. The emission requirements in this document are not applicable to the intentional transmissions from a radio transmitter, as defined by the ITU-R, including its spurious emissions. Equipment that is covered by other CISPR product and product family emission standards are excluded from the scope of this document, except where they include ICE(s). In the latter case, the equipment complies with this document in all modes of operation where the ICE(s) is(are) active. NOTE 5 The other CISPR product or product family emission standard can also apply to the equipment for those modes of operation where the ICE(s) is (are) not active. In case the ICE(s) is (are) always in operation, the other CISPR product or product family emission standard can still apply, for verifying the emissions from the other components and circuitry of the equipment. Annex B and Annex C contain methods to evaluate the disturbance characteristics of high voltage ignition systems. Annex H contains a justification for the limits for an electric vehicle. Annex I lists work being considered for future revisions. This seventh edition cancels and replaces the sixth edition published in 2007 and its Amendment 1 (2009). This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) test setups and requirements for electric vehicles and hybrid electric vehicles in charging mode were added, b) antenna positions relative to the vehicle were defined, c) some statements dealing with series surveillance and type approval were deleted, d) annexes for measurement instrumentation uncertainty were added, e) the vehicles, boats and devices subject to this document are separated into three groups with corresponding limits applied accordingly, f) an annex describing networks to be used for the charging mode was added, g) an annex describing justification for the limits of an electric vehicle was added, h) general improvements were made. CISPR 12:2025 Les limites donnees dans le present document sont prevues pour procurer la protection des recepteurs exterieurs dans la plage de frequences de 30 MHz a 1 000 MHz. La conformite au present document nassure pas une protection adequate pour les recepteurs situes a moins de 10 m du vehicule, du bateau ou de lengin. Le present document concerne le rayonnement denergie electromagnetique pouvant brouiller la reception des radiocommunications et qui est produit par: 1) des vehicules entraines par un moteur a combustion interne (ICE, Internal Combustion Engine), par des moyens electriques, ou par les deux (voir 3.1.34); 2) des bateaux entraines par un ICE, par des moyens electriques, ou par les deux (voir 3.1.4). Les bateaux sont soumis a lessai de la meme maniere que les vehicules, excepte lorsquils ont des caracteristiques particulieres telles quelles sont 3) explicitement fixees dans le present document; 3) des engi