ČSN EN 13016-1

Kapalné ropné výrobky - Tlak par - Část 1: Stanovení tlaku vzduchem nasycených par (ASVP) a výpočet ekvivalentu tlaku suchých par (DVPE) (Norma k přímému použití jako ČSN).

Dostupné jazyky: Anglicky

Dostupné provedení: Tištěné

od 13.90 EUR zobrazit na eshopu

Podrobné informace

Označení: ČSN EN 13016-1

Datum vydání: 01.12.2024

Stran: 24

Země: Česká technická norma

Kde koupit?

Můžete zakoupit na eshop.normservis.cz

Anotace

This document specifies a method for the determination of the air saturated vapour pressure (ASVP) (total vapour pressure), exerted in vacuo, by volatile, low viscosity petroleum products, components, ethanol blends up to 85 % (V/V), and feedstocks containing air. A dry vapour pressure equivalent (DVPE) can be calculated from the air containing vapour pressure (ASVP) measurement.
The conditions used in the test described in this document are a vapour-to-liquid ratio of 4:1 and a test temperature of 37,8 °C.
The equipment is not wetted with water during the test, and the method described is therefore suitable for testing samples with or without oxygenates; no account is taken of dissolved water in the sample.
The method described is suitable for testing air saturated samples with a DVPE between 15,5 kPa and 106,0 kPa; vapour pressures outside this range can be measured, but the precision has not been determined.
This document is applicable to fuels containing oxygenated compounds up to the limits stated in the relevant Council Directive 85/536/EEC, and for ethanol-fuel blends up to 85 % (V/V) ethanol

Populární vydavatelé

celý katalog