Aktivní norma | Vydána: 01.08.2024

ČSN EN 1999-1-2-ed.2

Eurokód 9: Navrhování hliníkových konstrukcí - Část 1-2: Navrhování konstrukcí na účinky požáru (Norma k přímému použití jako ČSN).

Dostupné jazyky: Anglicky

Dostupné provedení: Tištěné

od 24.40 USD zobrazit na eshopu

Podrobné informace

Označení: ČSN EN 1999-1-2-ed.2

Datum vydání: 01.08.2024

Stran: 60

Země: Česká technická norma

Kde koupit?

Můžete zakoupit na eshop.normservis.cz

Anotace

This document deals with the design of aluminium structures for the accidental situation of fire exposure and is intended to be used in conjunction with EN 1999-1-1, EN 1999-1-3, EN 1999-1-4 and EN 1999-1-5. This document only identifies differences from, or supplements to, normal temperature design.
This document applies to aluminium structures required to fulfil a load bearing function.
This document gives principles and application rules for the design of structures for specified requirements in respect of the aforementioned function and the levels of performance.
This document applies to structures, or parts of structures, that are within the scope of EN 1999-1-1 and are designed accordingly.
The methods given in this document are applicable to the following aluminium alloys:
EN AW-3004 - H34
EN AW-5083 - O and H12
EN AW-6063 - T5 and T6
EN AW-5005 - O and H34
EN AW-5454 - O and H34
EN AW-6082 - T4 and T6
EN AW-5052 - H34
EN AW-6061 - T6
The methods given in this document are applicable also to other aluminium alloy/tempers of EN 1999-1-1, provided that either all necessary information on properties at elevated temperatures are available or the simplified assumptions in 5.2.1 are applied.
In addition to the general assumptions of EN 1990, the following assumptions apply:
- the choice of the relevant design fire scenario is made by appropriate qualified and experienced personnel, or is given by the relevant national regulation.
- any active and passive fire protection systems taken into account in the design will be adequately maintained.
For the design of new structures, EN 1999 is intended to be used, for direct application, together with EN 1990, EN 1991, EN 1992, EN 1993, EN 1994, EN 1995, EN 1997 and EN 1998.
EN 1999 is intended to be used in conjunction with:
- European Standards for construction products relevant for aluminium structures
- EN 1090-1, Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components
- EN 1090-3, Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structure
Loading
Cookies Cookies

Potřebujeme Váš souhlas k využití jednotlivých dat, aby se Vám mimo jiné mohli ukazovat informace týkající se Vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.

Souhlas můžete odmítnout zde.

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme Váš souhlas k využití jednotlivých dat, aby se Vám mimo jiné mohli ukazovat informace týkající se Vašich zájmů.