IEC 62772-ed.2.0 img
Aktivní norma | Vydána: 15.11.2023

IEC 62772-ed.2.0

Composite hollow core station post insulators with a.c. voltage greater than 1 000 V and d.c. voltage greater than 1 500 V - Definitions, test methods and acceptance criteria
(Isolateurs supports composites creux presentant une tension alternative superieure a 1 000 V et une tension continue superieure a 1 500 V - Definitions, methodes d´essai et criteres d´acceptation)

Dostupné jazyky: Anglicky a francouzsky

Dostupné provedení: Elektronické PDF, Tištěné, CD-ROM

od 8 101.40 CZK zobrazit na eshopu

Podrobné informace

Označení: IEC 62772-ed.2.0

Datum vydání: 15.11.2023

Stran: 62

Země: Mezinárodní technická norma

Kde koupit?

Můžete zakoupit na eshop.normservis.cz

Anotace

IEC 62772:2023 applies to composite hollow core station post insulators consisting of a load-bearing insulating tube (core) made of resin impregnated fibres, insulating filler material (solid, liquid, gaseous – pressurized or unpressurized), a housing (outside the insulating tube) made of polymeric material (for example silicone or ethylene-propylene) and fixing devices at the ends of the insulating tube. Composite hollow core station post insulators as defined in this standard are intended for general use in substations in both, outdoor and indoor environments, operating with a rated AC voltage greater than 1 000 V and a frequency not greater than 100 Hz or for use in direct current systems with a rated voltage greater than 1 500 V DC. The object of this document is: - to define the terms used; - to specify test methods; - to specify acceptance criteria. LIEC 62772:2023 s’applique aux isolateurs supports composites creux qui sont constitues d’un tube (noyau) isolant en fibres impregnees de resine supportant la charge mecanique, d’un materiau de charge interne (solide, liquide, gaz, sous pression ou pas), d’un revetement en polymere a l’exterieur du tube isolant (par exemple silicone ou ethylene-propylene) et de dispositifs de fixation a ses extremites. Les isolateurs supports composites creux, tels que definis dans la presente norme, sont destines a l’utilisation generale dans les postes, tant en exterieur qu’en interieur. Ils fonctionnent avec une tension alternative assignee de plus de 1 000 V en courant alternatif et a une frequence maximale de 100 Hz, ou sont utilises dans les systemes a courant continu avec une tension assignee superieure a 1 500 V en courant continu. Le present document a pour objet: - de definir les termes utilises; - de specifier des methodes d’essai; - de specifier les criteres d’acceptation.
Loading
Cookies Cookies

Potřebujeme Váš souhlas k využití jednotlivých dat, aby se Vám mimo jiné mohli ukazovat informace týkající se Vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.

Souhlas můžete odmítnout zde.

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme Váš souhlas k využití jednotlivých dat, aby se Vám mimo jiné mohli ukazovat informace týkající se Vašich zájmů.