IEEE 2862-2020

Podrobné informace

Označení: IEEE 2862-2020

Datum vydání: 08.03.2021

Stran: 31

Země: Mezinárodní technická norma

Kde koupit?

Můžete zakoupit na eshop.normservis.cz

Anotace

New IEEE Standard - Active.
The aim of this recommended practice is to establish a protocol for the measurement of partial discharges using ac voltages and VHF/UHF electromagnetic sensors, for quality control during routine tests on factory and pre-molded joints of high-voltage direct-current (HVDC) extruded cable systems having voltage ratings up to 800 kV. The various steps of the protocol for the measurement of partial discharges in such cables are carefully described. Details are given about the procedure for a sensor performance check, test setup preparation, and success criteria.
The ultimate goal of this recommended practice is not verifying the compliance with any maximum acceptable limit of partial discharge amplitude, but rather focusing on the whole phenomenon of partial discharges, in order to assess whether critical partial discharges are present in the tested object (either a factory joint or a pre-molded joint of a HVDC extruded cable system). “Critical partial discharge” is used here to mean a discharge within the insulation of the object under test, excluding all external discharges that can be present during the ac voltage test, (e.g., corona discharges due to HV electrodes, conducting leads related to the test setup).

ISBN: 978-1-5044-6880-0, 978-1-5044-7257-9, 978-1-5044-7258-6
Number of Pages: 31
Product Code: STDAPE24301, STD24535, STDPD24535
Keywords: HVDC extruded insulation, IEEE 2862™, partial discharge measurements, power cables, power cable joints, power cable testing
Category: Power Dielectrics, Insulation and Safety
Draft Number: P2862/D2, Jul 2020 - APPROVED DRAFT