Aktivní norma | Vydána: 27.11.2023

ISO 9869-3:2023

Thermal insulation of building elements — In-situ measurement of thermal resistance and thermal transmittance — Part 3: Probe insertion method
(Isolation thermique des éléments de construction — Mesurage in situ de la résistance thermique et du coefficient de transmission thermique — Partie 3: Méthode par insertion d´une sonde)

Dostupné jazyky: Anglicky

Dostupné provedení: Elektronické PDF, Tištěné

od 4 168.10 CZK zobrazit na eshopu

Podrobné informace

Označení: ISO 9869-3:2023

Datum vydání: 27.11.2023

Stran: 21

Země: Mezinárodní technická norma

Kde koupit?

Můžete zakoupit na eshop.normservis.cz

Anotace

Description / Abstract: This document describes a method for measuring the insulation performance of building elements, e.g. exterior walls, floors, ceilings (hereinafter referred to collectively as "walls"). This is done by using the probe insertion method, which gives the temperature distribution in the wall with a temperature sensor in a small diameter borehole in the wall. The measurement method is divided into a quantitative method, which measures the thermal resistance with a heat flow measurement, and a qualitative method without heat flow measurement. This document describes a screening test that is used for preliminary and practical diagnosis. The method is applicable to plane building components with a light heat capacity, such as those in frame structure dwellings. The measured results give the insulation performance at the local measurement points rather than that of the whole panel including thermal bridges such as studs.

Populární vydavatelé

celý katalog